Tap the
“Next” button.
If there are no
problems, tap
the “Next”
button.
The Gateway may take around 1 minute
to boot after powering on.
Note
First, make the initial connection
from the smartphone to the Gateway.
8
Switch the connection mode to “ON”.
9
Connect the Panasonic HOME IoT App to the Home IoT Gateway
Installer Tasks
Check that the Status LED on the rear of the Gateway is either lit or
double or triple flashing, and set WLAN AP switch 1 to the On posi-
tion.The Gateway will immediately enter AP mode. Once in AP mode,
the Application LED on the front of the Gateway will flash in orange.
Prepare the Gateway and
check that the power is on.
Application LED
12
34
O
N
Status LED
Rear
WLAN AP switch
STEP1
11
