Panasonic HDC-SD100 Operating Instructions Manual Download Page 83

Page: 83 / 140

VQT1T90

Editing

SD card management

Please be aware that if an SD card is formatted, then all the data recorded on the SD card will be
erased. Back up important data on a PC, DVD disc etc.

Select the menu. (

22)

When the confirmation message appears,
select [YES], then press the cursor button.

When formatting is complete, press the MENU
button to exit the message screen.

Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations
or shock.

Used capacity and remaining capacity of the SD card can be confirmed.

Rotate the mode dial to select

Select the menu. (

22)

Press the MENU button to close the indication.

Formatting

[SETUP]

[FORMAT CARD]

[YES]

Use this unit to format SD cards.
Do not format an SD card using any other equipment such as a PC. The card may not be used
on this unit.

SD card information display

[SETUP]

[CARD STATUS]

[YES]

Summary of Contents for HDC-SD100













































































































































Search results

Summary of Contents for HDC-SD100

Reviews:

Related manuals for HDC-SD100

Brands by name

Popular brands

Panasonic HDC-SD100, Operating Instructions Manual

Search results

Summary of Contents for HDC-SD100

Reviews:

Related manuals for HDC-SD100

Brands by name

Popular brands