Panasonic HDC-SD100 Operating Instructions Manual Download Page 35

Page: 35 / 140

VQT1T90

Recording
(Basic)

Recording motion pictures

This unit records high definition images that are compatible with the AVCHD format on an SD card.
Sound is recorded with the Dolby Digital 5.1 Creator.

Use an SD card that can be used for motion picture recording. (

19)

Rotate the mode dial while at the same time pressing in the lock release button

if changing from

OFF to another mode.

Align with the mark

Rotate the mode dial to select

Set the LCD/EVF select switch to
LCD or EVF. (

29)

Open the LCD monitor when it is set to LCD.

Press the recording start/stop
button to start recording.

While recording is in progress, the recording
will not stop even if the LCD monitor is closed.

Press the recording start/stop
button again to pause recording.

[

] and [

] are red during recording. Do not

move this unit until [

] is green.

Summary of Contents for HDC-SD100













































































































































Search results

Summary of Contents for HDC-SD100

Reviews:

Related manuals for HDC-SD100

Brands by name

Popular brands

Panasonic HDC-SD100, Operating Instructions Manual

Search results

Summary of Contents for HDC-SD100

Reviews:

Related manuals for HDC-SD100

Brands by name

Popular brands