Panasonic HDC-SD100 Operating Instructions Manual Download Page 25

Page: 25 / 140

VQT1T90

Playback mode

*1 When the disc playback tab [

] is selected while a DVD burner (optional) is connected, or when

[INTEL. SCENE] (

73) is selected, this does not appear.

*2 Only when the disc playback tab [

] is selected while a DVD burner (optional) is connected, this

appears.

([

] motion picture playback)

[VIDEO SETUP]

[REPEAT PLAY] (

74)

[RESUME PLAY] (

74)

[SCENE PROTECT]

(

81)

[GUIDE LINES] (

52)

[EDIT SCENE]

[DIVIDE] (

80)

[DELETE] (

79)

[DISC SETUP]

[FORMAT DISC] (

98)

[AUTO PROTECT] (

98)

[DISC STATUS] (

98)

[SETUP]

[CARD STATUS] (

83)

For any other menus that are not described
above, refer to menus with the same names for
the recording mode.

([

] still picture playback)

[PHOTO SETUP]

[SLIDES INTERVAL] (

76)

[SCENE PROTECT]

(

81)

[DPOF SET]

(

82)

[DELETE]

(

79)

For any other menus that are not described
above, refer to menus with the same names for
the recording mode and motion picture
playback.

Summary of Contents for HDC-SD100













































































































































Search results

Summary of Contents for HDC-SD100

Reviews:

Related manuals for HDC-SD100

Brands by name

Popular brands

Panasonic HDC-SD100, Operating Instructions Manual

Search results

Summary of Contents for HDC-SD100

Reviews:

Related manuals for HDC-SD100

Brands by name

Popular brands