88
VQT3K80
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
Picture size of the still picture to be recorded is
(1920
k
1080).
1
Pause at the scene you want to save as a still picture during
playback.
≥
It is convenient to use slow-motion playback and frame-by-frame playback.
2
Press the
button fully.
≥
Date the motion picture was recorded will be registered as date of the still picture.
≥
Quality will be different from the normal still picture.
Highlight&Time frame index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be
played back from any midway point of the scene you wish to see.
≥
Operate the zoom lever or the zoom buttons to
side and change over the thumbnail display to
Highlight&Time frame index. (
l
37)
1
Touch .
≥
To display the next (previous) page:
j
Slide the thumbnail display upward (downward) while touching it.
j
Switch the touch menu, and then touch
(up)/
(down) on the thumbnail
scroll lever.
2
Touch the desired search condition.
[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]
*
/[HIGHLIGHT]
*
* It is not displayed on iFrame scenes.
≥
When select [FACE], it will select the portion for which face recognition was performed
from the scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
Playback
operation
Playback display
Operating steps
Direct playback
During Playback
Touch the Direct playback bar or slide
it while touching.
≥
The playback pauses temporarily and
skips to the position touched or slid to
while touching.
≥
Playback will start by releasing your
touching or sliding finger.
≥
Direct playback bar cannot be operated
with the remote control.
2.1
M
HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 88 ページ ２０１０年１２月２９日 水曜日 午後２時５０分
