Panasonic HDC-HS900 Operating Instructions Manual Download

Page: 69 / 168

VQT3K80

When a registered person is detected by face recognition during recording, the name
registered for that person is displayed.

≥

Displayed name will disappear after a while.

≥

It is displayed according to the registration order setting from the first person.

≥

This function is not displayed during face-to-face recording or playback mode.

Detected faces appear with frames.

≥

Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen
take preference over others. When [FACE RECOG.] is [ON], registered people are given
priority.

∫

Prioritised face framing

Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness
will be performed against the prioritised face framing.

≥

Prioritised face framing is only displayed with Portrait Mode in the intelligent auto mode.

≥

The white frame is for face detection only.

≥

Focus will be set to prioritised face framing and the brightness adjusted when the unit is set
to Portrait mode in intelligent auto mode.

≥

Focus will be set to prioritised face framing when the

button is pressed halfway when

recording still pictures. Prioritised face framing will turn to green when the focus is set.

[NAME DISPLAY]

: [RECORD SETUP]

[NAME DISPLAY]

desired number

[OFF]/[1]/[2]/[3]

[FACE FRAMING]

: [RECORD SETUP]

[FACE FRAMING]

desired setting

[OFF]:

Cancel the setting.

[PRIMARY]:

Only the prioritised face framing is displayed.

[ALL]:

All face detection framings are displayed.

MENU

HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 69 ページ２０１０年１２月２９日　水曜日　午後２時５０分

Summary of Contents for HDC-HS900









































































































































































Search results

Summary of Contents for HDC-HS900

Reviews:

Related manuals for HDC-HS900

Brands by name

Popular brands

Panasonic HDC-HS900, Operating Instructions Manual

Search results

Summary of Contents for HDC-HS900

Reviews:

Related manuals for HDC-HS900

Brands by name

Popular brands