73
VQT3K80
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
≥
Switch to manual mode. (
l
80)
1
Select the menu.
≥
It is possible to select the setting from the quick menu in manual mode. (
l
40) The
microphone level returns to the setting adjusted previously, and it cannot be set from the
quick menu.
2
(When [SET
r
]/[SET] is selected)
Touch /
to
adjust.
≥
Touch
to activate/disactivate AGC. When AGC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥
Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3
Touch [ENTER] to set the microphone input
level and then touch [EXIT].
≥
(Microphone input level meter) appears
on the screen.
≥
When switching to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥
When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥
When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the
sound is stereo (2 ch) and only the front-left and front-right input level meters function.
≥
The microphone input level meter shows the largest volume for the microphones.
≥
You cannot record with the audio completely muted.
[MIC LEVEL]
: [RECORD SETUP]
#
[MIC LEVEL]
#
desired setting
[AUTO]:
AGC is activated, and the recording level is adjusted
automatically.
[SET
r
]/[SET]:
The desired recording level can be set.
MENU
A
Centre
B
Front left
C
Back left
D
Front right
E
Back right
F
Microphone input level
HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 73 ページ ２０１０年１２月２９日 水曜日 午後２時５０分
