Panasonic HDC-HS900 Operating Instructions Manual Download

Page: 147 / 168

147

VQT3K80

With other products

Problem

Check points

Although this unit is
correctly connected to a
TV, images cannot be
seen.

The images are
squeezed horizontally.

≥

Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.

≥

Change the [TV ASPECT] setting to match the aspect
ratio of the TV. (

105)

≥

Change the setting of the unit depending on the cable
connecting to the TV. (

106)

If the SD card is inserted
in another device, it is
not recognised.

≥

Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card/
SDXC Memory Card) that you inserted. Refer to the
operating instructions of the device for details.

VIERA Link does not
work.

(Setting on this unit)

≥

Connect with a HDMI mini cable (optional). (

107)

≥

Touch [MENU], then touch [SETUP]

[VIERA Link]

[ON]. (

107)

≥

Turn the unit off and then back on again.

(Setting on other devices)

≥

If the TV input does not switch automatically, switch the
input using the TV remote control.

≥

Check the VIERA Link setting on the connected device.

≥

Please refer to the operating instructions of the
connected device.

The power of the DVD
burner cannot be turned
on.

≥

When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.

Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.

≥

Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.

When this unit is
connected to a TV in still
picture recording mode,
the picture on the TV
may appear grainy.

≥

This is not a malfunction and does not affect the still
pictures being recorded or played back.

HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 147 ページ２０１０年１２月２９日　水曜日　午後２時５０分

Summary of Contents for HDC-HS900









































































































































































Search results

Summary of Contents for HDC-HS900

Reviews:

Related manuals for HDC-HS900

Brands by name

Popular brands

Panasonic HDC-HS900, Operating Instructions Manual

Search results

Summary of Contents for HDC-HS900

Reviews:

Related manuals for HDC-HS900

Brands by name

Popular brands