Panasonic HDC-HS900 Operating Instructions Manual Download

Page: 114 / 168

114

VQT3K80

Connect the AC adaptor (supplied with DVD burner) to the DVD
burner.

≥

You cannot supply power to the DVD burner from this unit.

Connect this unit to the AC adaptor and change the mode to

Connect this unit to the DVD burner with the USB Connection Cable
(supplied with DVD burner).

USB Connection Cable (supplied with DVD burner)

DVD burner (optional)

≥

Insert the plugs as far as they will go.

Insert the disc in the DVD burner.

≥

Insert the DVD disc with the recording side down when using the DVD burner.

Touch the desired item.

[BURN DISC]:

Refer to page 115 for how to copy discs.

[PLAY DISC]:

Refer to page 117 for how to play back the copied discs.

To terminate the connection with the DVD burner

Touch [EXIT].

≥

Disconnect the USB Connection Cable from this unit.

HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 114 ページ２０１０年１２月２９日　水曜日　午後２時５０分

Summary of Contents for HDC-HS900









































































































































































Search results

Summary of Contents for HDC-HS900

Reviews:

Related manuals for HDC-HS900

Brands by name

Popular brands

Panasonic HDC-HS900, Operating Instructions Manual

Search results

Summary of Contents for HDC-HS900

Reviews:

Related manuals for HDC-HS900

Brands by name

Popular brands