Panasonic HC-X910 Operating Instructions Manual Download Page 81

Page: 81 / 203

- 81 -

When recording, the input level from the built-in microphones and the external microphone terminal
can be adjusted.

Select the menu.

≥

It is possible to select the setting from the quick menu in Manual Mode. (

) The microphone

level returns to the setting adjusted previously, and it cannot be set from the quick menu.

(When [SET

]/[SET

] is selected)

Touch /

adjust.

≥

The adjustment screen to be displayed depends on the
setting of [5.1ch/2ch].

≥

Adjust the microphone input level so that the last 2 bars
of the gain value are not red. (Otherwise, the sound is
distorted.) Select a lower setting for microphone input
level.

Touch [ENTER].

≥

Touch [EXIT] to complete the setting.

≥

When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.

≥

The sound will be recorded in stereo (2ch) when [5.1ch/2ch] is set to [2ch] or an external
microphone is input.

≥

(microphone input level meter) is displayed on the screen when [5.1ch/2ch] is set to

[5.1ch], and

(microphone input level meter) is displayed when [5.1ch/2ch] is set to

[2ch] and [MIC LEVEL] is set to a setting other than [AUTO].

≥

The microphone input level meter shows the largest volume for the microphones.

≥

You cannot record with the audio completely muted.

[MIC LEVEL]

: [RECORD SETUP]

[MIC LEVEL]

desired setting

[AUTO]:

AGC is activated, and the recording level is adjusted automatically.

[SET

The desired recording level can be set. AGC is activated, and sound
distortions are reduced.

[SET

The desired recording level can be set. Sounds are recorded in
natural quality.

MENU

(When set to [5.1ch])

Centre

Front left

Back left

Front right

Back right

Microphone input level

Summary of Contents for HC-X910












































































































































































































Search results

Summary of Contents for HC-X910

Reviews:

Related manuals for HC-X910

Brands by name

Popular brands

Panasonic HC-X910, Operating Instructions Manual

Search results

Summary of Contents for HC-X910

Reviews:

Related manuals for HC-X910

Brands by name

Popular brands