Panasonic HC-X910 Operating Instructions Manual Download Page 63

Page: 63 / 203

- 63 -

Select the operation icons to add different effects to the images to be recorded.

Touch (left side)/ (right side) of

on the Touch Menu to display the

operation icons. (

)

Touch an operation icon.

(e.g. PRE-REC)

≥

The operation icons that are displayed in the Touch Menu
can be changed. ([SELECT OPERATION ICONS]:

)

≥

Select the operation icon again to cancel the function.

≥

Refer to the respective pages for cancelling the following
functions.

Smile Shot (

)

Built-in flash (

)

Self-timer (

)

Guidelines (

)

≥

The icon is displayed when the operation icon is set.

Operation icons

*1 It is not displayed in Still Picture Recording Mode.
*2 It is not displayed in Motion Picture Recording Mode.
*3 It is displayed only when a headphone is connected to the headphone output terminal. [MIC

LEVEL] (

) is set to anything other than [AUTO],

is displayed as the operation icon,

and adjustment of input level of the microphone is possible.

≥

If you turn off the unit or change the mode to

, PRE-REC, Backlight Compensation, Colour

Night View, Self-timer and Tele Macro functions are cancelled.

≥

If you turn off the unit, the Fade function is cancelled.

≥

It is possible to set from the menu.
(Except for the Headphone volume adjustment)

Advanced (Recording)

Recording functions of operation icons

PRE-REC

Fade

Intelligent Contrast Control

PRE-REC

Smile Shot

Built-in flash

Red-eye Reduction

Self-timer

Intelligent Exposure

Backlight Compensation

Tele Macro

Guidelines

Colour Night View

Headphone volume adjustment/
Microphone level adjustment

Summary of Contents for HC-X910












































































































































































































Search results

Summary of Contents for HC-X910

Reviews:

Related manuals for HC-X910

Brands by name

Popular brands

Panasonic HC-X910, Operating Instructions Manual

Search results

Summary of Contents for HC-X910

Reviews:

Related manuals for HC-X910

Brands by name

Popular brands