Panasonic HC-X910 Operating Instructions Manual Download Page 67

Page: 67 / 203

- 67 -

When the

button is pressed, the flash is activated and the picture will be recorded. Use

the Built-in flash in order to record still pictures in dark places.

The icon changes each time it is touched.

([ON])

A ([AUTO])

([OFF])

≥

The unit automatically determines if the flash is necessary even when it has been set to

detecting the ambient brightness. (If it determines that the flash is necessary, the

indication

lights up in red.)

∫

To adjust the brightness of the flash

≥

The light from the flash may be blocked by the lens hood when the lens hood is attached.

≥

Do not use the flash with the Filter Kit (optional) or the Conversion Lens (optional) attached.

≥

If the

indication etc. flashes when the

button is pressed halfway, the flash is not activated.

≥

The available range of the flash is approx. 1 m to 2.5 m in dark places.

≥

Using the flash fixes a shutter speed to 1/500 or slower.

Reduces the phenomena where human eyes become red from flashes.

≥

The flash is activated 2 times.

≥

The red-eye phenomenon tends to appear in certain recording conditions and more with some
people than with others.

≥

When faces are detected in the Intelligent Auto Mode or Intelligent Auto Plus Mode, the Red-eye
Reduction is set to on.

Built-in flash

: [PICTURE]

[FLASH LEVEL]

desired setting

[

Much brighter

[

0]:

Normal

[

Less bright

Red-eye Reduction

MENU

Summary of Contents for HC-X910












































































































































































































Search results

Summary of Contents for HC-X910

Reviews:

Related manuals for HC-X910

Brands by name

Popular brands

Panasonic HC-X910, Operating Instructions Manual

Search results

Summary of Contents for HC-X910

Reviews:

Related manuals for HC-X910

Brands by name

Popular brands