Panasonic HC-X2050 Operating Instructions Manual Download

Page: 84 / 213

Chapter 4 Operation

—

Menu settings

- 84 -

[UB MODE]

Selects the user bits mode. User bits information is recorded in the clip.

(Factory setting: [USER])

[REC COUNTER]

Sets operation of the counter for recording.

(Factory setting: [TOTAL])

[TIME STAMP]

Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.

(Factory setting: [OFF])

[NETWORK] menu

Sets the setting regarding the network function.

[DEVICE SEL]

Select the device that connects external equipment (computer, etc.) to the unit.
The unit may restart when the setting is changed.

(Factory setting: [OFF])

[NETWORK FUNC]

Selects the network function of the unit.

(Factory setting: [OFF])

[FRAME RATE]

Selects the image information (such as frame rate) of the camera.

[USER]

Selects the user bits set in [UB PRESET].

[TIME]

Selects the local time. (hh, mm, ss)

[DATE]

Selects the local date and time. (YY, MM, DD, hh)

[TC]

Records the time code value as user bits.

[CLIP NAME]

Records the value that CAM INDEX (one character) and CARD COUNT (3-digit number) both converted to ASCII character
code.
Only enabled when the [SYSTEM] menu



[FILE FORMAT]



[MOV] or [MP4] is set.

[TOTAL]

The count continues cumulatively until either you press the USER button assigned to [RESET] or touch the USER button icon.

[CLIP]

Clears the counter value at the start of recording and counts the time for each recording.

[OFF]

Does not superimpose the date and time.

[DATE]

Superimposes only the date.

[TIME]

Superimposes only the time.

[DATE&TIME]

Superimposes the date and time.

[WLAN]

Connects via a wireless LAN.

[OFF]

Does not connect.

[STREAMING]

Enables the streaming function.

[OFF]

Does not use the network function.

Summary of Contents for HC-X2050






















































































































































































































Search results

Summary of Contents for HC-X2050

Reviews:

Related manuals for HC-X2050

Brands by name

Popular brands

Panasonic HC-X2050, Operating Instructions Manual

Search results

Summary of Contents for HC-X2050

Reviews:

Related manuals for HC-X2050

Brands by name

Popular brands