Panasonic HC-X2050, Operating Instructions Manual

Page: 68 / 213

Chapter 4 Operation — Menu settings
- 68 -
[NAME EDIT]
Edits the name of the scene file selected in the scene file menu. (Maximum 8 characters)
≥ Refer to page 100 for setting procedures.
[LOAD/SAVE/INITIALIZE]
Loads/saves/initializes the setting values of the scene file assigned to the current scene file number (any one from 1 to 6).
≥ Refer to pages 99 to 100 for setting procedures.
[MASTER DTL]
Sets the level of the detail effect of the whole part.
The items that can be set are as follows.
≥ [ j 15]…[ i 15]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
The items that can be set are as follows.
≥ [0]…[30]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
The items that can be set are as follows.
≥ [ j 7]…[ i 7]
[RB GAIN CONTROL SETTING]
Adjust the color hue when white balance has been set in [Ach] or [Bch].
You can also decide whether to maintain the setting content when you have made white balance adjustments/black balance adjustments.
[R GAIN AWB A]
Set the Rch gain (strength of red) for white balance [Ach].
The items that can be set are as follows.
≥ [ j 30]…[ i 30]
[B GAIN AWB A]
Set the Bch gain (strength of blue) for white balance [Ach].
The items that can be set are as follows.
≥
[
j
30]…[
i
30]
[R GAIN AWB B]
Set the Rch gain (strength of red) for white balance [Bch].
The items that can be set are as follows.
≥
[
j
30]…[
i
30]
[B GAIN AWB B]
Set the Bch gain (strength of blue) for white balance [Bch].
The items that can be set are as follows.
≥ [ j 30]…[ i 30]
[AWB A GAIN OFFSET]
When the white balance has been automatically performed with [Ach], set the value of Rch gain and Bch gain.
[AWB B GAIN OFFSET]
When the white balance has been automatically performed with [Bch], set the value of Rch gain and Bch gain.
[LOAD] Selects and loads the scene file saved in the internal memory of the unit.
[SAVE] Saves the current setting value as a scene file in the internal memory of the unit by specifying the title and the file number.
[INITIALIZE] Initializes the selected scene files (1 to 6) to the factory settings.
[ON] Keeps the values set in [R GAIN AWB A] and [B GAIN AWB A].
[OFF] Sets the value of Rch gain and Bch gain to [0].
[ON] Keeps the values set in [R GAIN AWB B] and [B GAIN AWB B].
[OFF] Sets the value of Rch gain and Bch gain to [0].