manualshive.com logo in svg

Panasonic HC-X2050, Operating Instructions Manual

The Panasonic HC-X2050 is a high-performance professional camcorder ideal for capturing stunning videos. Ensure optimal usage with the detailed Operating Instructions Manual available for free download. Find the comprehensive manual at manualshive.com, enabling you to unleash the full potential of your HC-X2050 without any hassle.

Share
Download
background image

Chapter 3   Preparation 

—

 Assigning function to the USER buttons

- 50 -

@

NOTE

0

The following functions are disabled the next time you turn the unit on after turning it off with the power.

j

[FBC], [S.GAIN], [AREA], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [Y GET], [D.ZOOM], [FAST ZOOM], [REC CHECK], [DEL LAST CLIP], 
[FOCUS ASSIST], [WFM], [CARD READER MODE], [STREAMING START]

0

The following functions cannot be set when IR recording is enabled.

j

[AWB], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [AE LEVEL], [FACE DETECT]

0

In auto mode, the following functions cannot be set:

j

[AWB], [FBC], [ONE PUSH AF], [ATW], [FOCUS ASSIST]

0

USER button functions can also be set from the following menus:

[ONE PUSH AF] ([ONE PUSH AF])

Assigns the one-push auto focus function.

[S.GAIN] ([S.GAIN])

Assigns the function that switches to super gain.

[AREA] ([AREA])

Assigns the area function.

[ATW] ([ATW])

Switches enable/disable of the auto tracking white balance function.

[ATW LOCK] ([ATW LOCK])

Fixes the value of the white balance. Press the USER button again or touch the USER button icon to 
resume the operation of the auto tracking white balance.
Enable when the auto tracking white balance is operating.

[SPOTLIGHT] ([SPOTLIGHT])

Switches enable/disable of the auto iris control function for the spot light.

[BACKLIGHT] ([BACKLIGHT])

Switches enable/disable of the auto iris control function for the backlight compensation.

[AE LEVEL] ([AE LEVEL])

Switches enable/disable of the AE level function.

[Y GET] ([Y GET])

Assigns the function that displays the luminance level of the frame area displayed near the center.

[O.I.S.] ([O.I.S.])

Switches enable/disable of the optical image stabilizer function.

[i.ZOOM] ([i.ZOOM])

Assigns the zoom function to minimize image distortion.

[D.ZOOM] ([D.ZOOM])

Switches enable/disable of digital zoom. Zooms in on the field angle by 2

, 5

, and 10

 vertically and 

horizontally each time the USER button is pressed or the USER button icon is touched.

[IR REC] ([IR REC])

Switches enable/disable of IR recording.

[FAST ZOOM] ([FAST ZOOM])

Speeds up the zoom speed when the zoom lever is pushed in all the way.

[PRE REC] ([PRE REC])

Switches enable/disable of pre-recording.

[SUPER SLOW] ([SUPER SLOW])

Switches enable/disable of the super slow recording function.

[BACKGR PAUSE] ([BACKGR PAUSE])

Assigns the function that stops the background recording of card slot 2.
Press and hold the USER button to which [BACKGR PAUSE] is assigned for approximately 5 seconds or 
touch and hold the USER button icon for approximately 5 seconds and release to stop background 
recording.

[REC CHECK] ([REC CHECK])

Automatically plays back the last approximately 3 seconds of the previously shot clip.

[DEL LAST CLIP] ([DEL LAST CLIP])

Deletes the clip last shot.

[FOCUS ASSIST] ([FOCUS ASSIST])

Switches enable/disable of the focus assist function.

[WFM] ([WFM])

Switches the display of the waveform monitor. The waveform display is selected in the [VIDEO OUT/LCD/
VF] menu 

 [EI ASSIST] 

 [WFM MODE].

[ZEBRA] ([ZEBRA])

Switches display/hide of zebra patterns.

[LEVEL GAUGE] ([LEVEL GAUGE])

Switches display/hide of the level gauge.

[LEVEL GAUGE SET] ([LEVEL GAUGE SET])

Sets the current horizontal and vertical direction as the reference value of the level gauge.

[LCD/VF DETAIL] ([LCD/VF DETAIL])

Adjusts the intensity for the contour of the video in the viewfinder or LCD monitor to make it easier to focus.

[FACE DETECT] ([FACE DETECT])

Switches enable/disable of the face detection AE&AF function.

[MENU] ([MENU])

Switches display/hide of the menu.

[LOAD SETUP FILE] ([LOAD SETUP FILE])

Selects the setup file saved on the memory card to load on the unit.

[LCD BACKLIGHT] ([LCD BACKLIGHT])

Switches the brightness of the LCD monitor. Each time you either press the USER button or touch the 
USER button icon, the brightness switches in the order [0], [1], [2], [-1].

[CARD READER MODE] ([CARD READER MODE]) Switches enable/disable of the card reader mode function (USB mass storage function).

≥

Release the connection to enable the card reader mode when connected to a network via a wireless LAN. 
(The unit returns to the original setting when the card reader mode is disabled.)

[STREAMING START] ([STREAMING START])

Starts/stops streaming from the unit. 
Streaming starts only during RTMP streaming.

[COUNTER] ([COUNTER])

Switches the time code display. (Time code display/user bits display/counter display/no display)

[RESET] ([RESET])

Resets the counter value.

[REAR RING] ([REAR RING])

The rear ring operation is switched. (Zoom/iris/iris and AE level)

USER button functions

Menu settings

[DRS]

[SCENE FILE] menu 

 [DRS]

[AE LEVEL]

[SCENE FILE] menu 

 [AE LEVEL]

[O.I.S.]

[CAMERA] menu 

 [SW MODE] 

 [O.I.S.]

[i.ZOOM]

[CAMERA] menu 

 [SW MODE] 

 [i.ZOOM]

[IR REC]

[CAMERA] menu 

 [SW MODE] 

 [IR REC]

[PRE REC]

[RECORDING] menu 

 [PRE REC]

Item (USER button icon display)

Description

Summary of Contents for HC-X2050






















































































































































































































Reviews:

No comments

Related manuals for HC-X2050

Hamilton/Buhl HDV5200-1 Instruction Manual preview
HDV5200-1
Brand: Hamilton/Buhl Pages: 14
Vivitar 610v2 User Manual preview
610v2
Brand: Vivitar Pages: 54
Vivitar DVR 558HD-V1 User Manual preview
DVR 558HD-V1
Brand: Vivitar Pages: 69
Emerson EVC1700 User Manual preview
EVC1700
Brand: Emerson Pages: 33
Hitachi DZ-HS401 Instruction Manual preview
DZ-HS401
Brand: Hitachi Pages: 163
JVC GR-FX17 Instructions Manual preview
GR-FX17
Brand: JVC Pages: 24
JVC GR-DX series Service Manual preview
GR-DX series
Brand: JVC Pages: 17
JVC GR-DVL9800A Service Manual preview
GR-DVL9800A
Brand: JVC Pages: 9
JVC GR-DVL400ED Service Manual preview
GR-DVL400ED
Brand: JVC Pages: 5
JVC GR-DVL505UM Service Manual preview
GR-DVL505UM
Brand: JVC Pages: 9
JVC GR-FX23 Instructions Manual preview
GR-FX23
Brand: JVC Pages: 56
JVC GR-DX25 Instructions Manual preview
GR-DX25
Brand: JVC Pages: 48
JVC GR-DVM55U Service Manual preview
GR-DVM55U
Brand: JVC Pages: 39
JVC GR-FX15EK Service Manual preview
GR-FX15EK
Brand: JVC Pages: 71
JVC GR-DX106 Instructions Manual preview
GR-DX106
Brand: JVC Pages: 60
JVC GR-DX100 Instructions Manual preview
GR-DX100
Brand: JVC Pages: 60
JVC GR-DX25EK Service Manual preview
GR-DX25EK
Brand: JVC Pages: 68
JVC GR-DVL9200 Instructions Manual preview
GR-DVL9200
Brand: JVC Pages: 68

Brands by name

Popular brands

Load more brands