Panasonic HC-X2050 Operating Instructions Manual Download Page 147

Page: 147 / 213

Chapter 6 Playback

—

Thumbnail operation

- 147 -

Display of clip information

Displays the information of the clip where the cursor is positioned.

Move the yellow cursor to the clip to display the clip information.

Select the [THUMBNAIL] menu



[CLIP]



[INFORMATION].

The clip information is displayed.

∫

Clip information

Clip that cannot be played back

This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.

Thumbnail number

Protect status of the clip

This is displayed when the clip is protected.

Thumbnail image

Clip name

[START TC]

Displays the time code value at the start of the recording.

[START UB]

Displays the user bits value at the start of the recording.

[DATE]

Displays the date of the recording.

[TIME]

Displays the time at the start of recording.

[DURATION]

Displays the time length of the clip.

[PIXEL/FREQ]

Displays the recording format of the clip.

[CODEC]

Displays the recording file format and the recording codec of the clip.

[FRAME RATE]

Displays the frame rate for super slow recording.

[GAMMA]

Displays the gamma of the clip.
Displayed when the [SYSTEM] menu



[FILE FORMAT] is set to other than [AVCHD].

Summary of Contents for HC-X2050






















































































































































































































Search results

Summary of Contents for HC-X2050

Reviews:

Brands by name

Popular brands

Panasonic HC-X2050, Operating Instructions Manual

Search results

Summary of Contents for HC-X2050

Reviews:

Brands by name

Popular brands