Panasonic HC-V727 Operating Instructions Manual Download Page 159 | Manualshive

Page: 159 / 192

background image

- 159 -

End User License Agreement

Before opening the CD-ROM package, please read the following.

You (“Licensee”) are granted a license for the
Software defined in this End User License
Agreement (“Agreement”) on condition that you
agree to the terms and conditions of this
Agreement.

Article 1 License
Licensee is granted the right to use the
software, including the information recorded or
described on the CD-ROM, instruction manuals,
and any other media provided to Licensee
(collectively “Software”), but all applicable rights
to patents, copyrights, trademarks and trade
secrets in the Software are not transferred to
Licensee.

Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer,
rent, lease, lend or allow any third party,
whether free of charge or not, to use, copy or
modify the Software, except as expressly
provided for in this Agreement.

Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the
Software in whole or a part solely for back-up
purpose.

Article 4 Computer
Licensee may use the Software only on one
computer, and may not use it on more than one
computer. Further, Licensee may not use the
Software for commercial software hosting
services.

Article 5 Reverse Engineering, Decompiling or
Disassembly
Licensee may not reverse engineer, decompile,
or disassemble the Software, except to the
extent either of them is permitted under law or
regulation of the country where Licensee
resides. Panasonic, or its distributors will not be
responsible for any defects in the Software or
damage to Licensee caused by Licensee’s
reverse engineering, decompiling, or
disassembly of the Software.

Article 6 Indemnification
The Software is provided “AS-IS” without
warranty of any kind, either expressed or
implied, including, but not limited to, warranties
of non-infringement, merchantability and/or
fitness for a particular purpose. Further,
Panasonic does not warrant that the operation
of the Software will be uninterrupted or error
free. Panasonic or any of its distributors will not
be liable for any damage suffered by Licensee
arising from or in connection with Licensee’s
use of the Software.

Article 7 Export Control
Licensee agrees not to export or re-export to
any country the Software in any form without
the appropriate export licenses under
regulations of the country where Licensee
resides, if necessary.

Article 8 Termination of License
The right granted to Licensee hereunder will be
automatically terminated if Licensee
contravenes any of the terms and conditions of
this Agreement. In this event, Licensee must
destroy the Software and related
documentation together with all the copies
thereof at Licensee’s own expense.

«
...
157
158
159
160
161
...
»

Summary of Contents for HC-V727

































































































































































































Reviews:

No comments

Related manuals for HC-V727

Viera Link HX-WA10

Brand: Panasonic Pages: 3

RCD-W50C - Cd/cdr Recorder/player

Brand: Sony Pages: 35

Brand: Jay-tech Pages: 55

Hard Disk Drive

Brand: Oki Pages: 16

Brand: GE Pages: 58

Brand: Canon Pages: 188

Brand: Canon Pages: 123

Brand: Samsung Pages: 102

Brand: Panasonic Pages: 20

Brand: Samsung Pages: 49

Brand: Samsung Pages: 98

Brand: Panasonic Pages: 221

STANTON 120 DUTCH ROLL

Brand: Jimmy Jib Pages: 14

Canosound 312 XL-S

Brand: Canon Pages: 48

Canosound 514XL-S

Brand: Canon Pages: 43

Canovision 8 UC15E

Brand: Canon Pages: 162

Brand: Canon Pages: 98

Brand: Canon Pages: 85

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands