- 170 -
You can view and change this unit’s Device name (SSID), which is used for operating this unit as a
wireless access point.
1
Touch [INPUT], and enter the desired Device name (SSID).
≥
Input up to 20 characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used. (
l
163
)
≥
For details on how to enter characters, refer to page
88
.
2
Touch [EXIT].
≥
If you are going to connect directly to a smartphone after changing the Device name (SSID), set
the connection again with the changed Device name (SSID). (
l
163
)
≥
The Password entered during the setting of direct connection cannot be changed. (
l
163
)
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet
Mask] and [MAC Address].
≥
If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],
you can set each item. Select the item you want to set, and set it.
≥
[MAC Address] cannot be changed.
You can test the connection between this unit and the wireless access point. The following
connections can be verified:
j
Connection to the wireless access point
j
Connection to “LUMIX CLUB”
j
Connection to USTREAM
j
Connection to the home monitor server
1
Touch [NEXT].
≥
The connection test starts.
2
Check the connection test result, and touch [EXIT].
≥
If the connection is successful, “
±
” is displayed. If the connection is not successful, “
t
” is
displayed.
≥
To test the connection to “LUMIX CLUB” or USTREAM, you need to make other settings in
advance. (
l
151
,
171
)
[Device Name]
[Wireless LAN setup]
[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]
[Connection Test]
