- 159 -
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPS
j
If the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j
If the wireless access point is not compatible with WPS:
[Searching for wireless access points to set up a connection] (
l
160
)
1
Press Wi-Fi button.
≥
When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], and
proceed to step 5.
2
Touch [Wi-Fi Setup].
3
Touch [Set Wireless Access Point].
4
Touch the part with no display of a wireless
access point.
≥
For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page
168
.
5
Touch [Easy Connection (WPS)].
6
Set the wireless access point to waiting for WPS.
≥
For further details, please read the operating instructions for the
wireless access point. (When using a tethering connection, please
read the operating instructions for the smartphone.)
≥
A message is displayed when the connection is complete.
≥
A message is displayed when the connection attempt fails. Touch
[EXIT], and set the connection again.
Enter a PIN code to set the Wi-Fi connection
1
Touch [PIN code] in Step 6.
2
Touch the wireless access point to be connected.
≥
If you touch [Refresh], you can search for wireless access points again.
3
Touch [ENTER].
4
Enter the PIN code displayed on this unit screen into the wireless access
point.
≥
For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
5
Touch [NEXT].
≥
A message is displayed when the connection is complete.
≥
A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
[Easy Connection (WPS)]
A
[Delete]
B
[EXIT]
