Intercom Features
70
For product assistance, visit www.globarange.com
For
A
assistance, visit www.joip.com
example, from different areas of the
house.
1
K
i
{#}{
2
}{
7
}{
3
}
2
{V}
/
{^}
: Select the desired setting.
3
M
i
{i}
Note:
L
Auto intercom cannot be used when:
– your handset is receiving a
transferred outside call.
– all handsets are being paged by the
base unit.
Answering an intercom call using
auto intercom
1
When you are paged by another
handset, speak into the
microphone.
L
To switch to the receiver, press
{s}
.
2
To end the intercom, press
{i}
.
Monitoring audio in a room
You can listen to the sound in a room
where another handset is located.
Important:
L
Before using this feature, set auto
intercom on the destination handset to
“
On (Ringer Off)
”
to allow access
by other handsets.
1
Call the destination handset (page
69).
L
You can listen to the audio.
2
To mute your sound output, press
1
if necessary.
3
Press
{i}
to stop monitoring.
Intercom features
between the handset
and base unit
Intercom calls
Intercom calls can be made between the
handset and base unit.
Note:
L
If you receive an outside call while
talking on the intercom, the interrupt
tone sounds. To answer the call:
– press
{
TEL
}
or
{
IP
}
on the handset.
– press
{
TEL
}
or
{
IP
}
on the base
unit. (BB-GT1540)
To turn the interrupt tone off, see page
51.
L
When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1
{
INT
}
2
To page the base unit, press
{
0
}
.
L
To stop paging, press
{i}
.
3
When you finish talking, press
{i}
.
BB-GT1520/BB-GT1522
1
{x}
L
All handsets beep for 1 minute.
L
To stop paging, press
{x}
.
2
When you finish talking, press
{x}
.
Available model:
BB-GT1520/BB-GT1522/BB-GT1540
Handset
Base unit
GT15xxE.book Page 70 Wednesday, August 1, 2007 11:59 AM
