5
8
Threshold value fine adjustment function
● The fine adjustment of the threshold value can be set in RUN mode,
forced ON output mode and forced OFF output mode.
●
For the setting procedure, refer to the “PRO MODE OPERATION
MANUAL” (only available in English).
Window comparator and hysteresis mode
1. Press the SET key for 2 seconds to display the
threshold level.
or
appears in the digital
display for a short time, then its threshold value
(1900 in the example).
2. Press the UP or DOWN key to change the
threshold value. In this example, the threshold
value of 1900 is increased to 2001.
3. Press the SET key to save the threshold value.
If you do not press the SET key, the value will be
saved automatically after 2 seconds.
4. Press the SET key again for 2 seconds to display
the other threshold level. Repeat the steps listed
above to change and save the value.
all other modes
1.
2.
1. Press the UP key to in‑
crease the threshold value
2. Press the DOWN key to
decrease the threshold value
3.
3.
4.
4.
3. Press the SET key to save
the threshold value.
4. The value has been saved.
If you do not press the
SET key, the value will be
saved automatically after 2
seconds.
9
Key lock function
The key lock prevents users from changing settings by accident. When
the key lock function is activated and you press any of the keys, the digital
display shows
.
activating the key lock function
1. Press the SET and the MODE key together for
3 seconds or longer.
The digital display changes to show the key
lock function has been activated.
Then the digital display returns to show the
current values.
Deactivating the key lock function
1. Press the SET and the MODE key together for
3 seconds or longer.
The digital display changes to show the key
lock function is active.
The digital display changes to show the key
lock function has been turned off.
Then the digital display returns to show the
current values.
10
Sensing output operation mode (L/D)
When the mode indicator L /D (yellow) is ON, you can switch from Light‑ON
mode to Dark‑ON mode and vice versa.
1. Press the MODE key. The L/D indicator lights
up and the current mode setting is displayed.
2. Press the UP key to select Dark‑ON mode or
the DOWN key to select Light‑ON mode.
3. Press the SET key to save the setting.
11
Custom mode (CUST)
The custom mode serves as a shortcut to one of the three settings listed in
the table and allows you to access a frequently‑used setting without having
to go through the PRO mode menu:
setting item
Digital display
Response time (default)
Emission power
Hysteresis
*
Use Pro5 in the PRO mode to select which item should be
displayed in custom mode.
1. Press the MODE key twice. The CUST indica‑
tor lights up and the pre‑selected setting item
is displayed.
2. Press the UP or DOWN key to change the
setting.
3. Press the SET key to save the setting.
4. Press the MODE key twice to return to RUN
mode.
