13
x3
A
B
B
x3
LED
connector
Cable tie
1
2
3
2
4
5
C
1
2
3
4
A
B
Phase 1
(Fig. A)
- Refer to Chap. "MAINTENANCE", remove the perimeter suction panel and the metal filters completely.
- Remove the front panel (A) (Fig. , ).
- Disconnect the LED connectors (Fig. ) and the motor connector (B) (Fig. ).
And then, pull out the motor connector (B) from the loop of the cable tie (Fig. ).
1 2
3
4
5
(Fig. B)
- Loosen the 4 screws securing the motor chamber (C) (Fig. ).
- Shift the motor chamber (C) sideways to position the 4 screws against the hole instead of the slot (Fig. , ).
- Lift the motor chamber (C) upwards to remove it from the Range Hood body (Fig. ).
1
2 3
4
ENGLISH
