Panasonic FP-X0 L14R, User Manual

Page: 247 / 290

Name Boolean Symbol Description
S
te
p
s
F
P
0/
FP
-e
FP
0
R
FP
Σ
FP
-X
FP
-X0
FP
2
F
P2
SH
/F
P
10S
H
UP/DOWN
counter F118
(UDC) Increments or decrements from the
preset value “S” based on up/down
input.
5
Shift register SR Shifts one bit of 16-bit [word internal
relay (WR)] data to the left.
1
(2)
*1
Left/right
shift register F119
(LRSR) Shifts one bit of 16-bit data range
specified by “D1” and “D2” to the left or
to the right.
5
Control instructions
Master
control relay
MC Starts the master control program.
2
Master
control relay
end MCE Ends the master control program.
2
Jump Label JP
LBL
The program jumps to the label
instruction and continues from there.
2
(3)
*2
1
Auxiliary
jump Label F19
(SJP)
LBL The program jumps to the label
instruction specified by “S” and
continues from there.
3
1
Loop Label LOOP
LBL The program jumps to the label
instruction and continues from there (the
number of jumps is set in “S”).
4
(5)
*3
1
Break
BRK Stops program execution when the
predetermined trigger turns on in the
TEST/RUN mode only.
1
: Available, : Not available, : Not available partially
*1) In the FP2/FP2SH/FP10SH, when internal relay WR240 or higher is used, the number of steps is the number in
parentheses. Also, in the FP2/FP2SH/FP10SH, when the specified internal relay number (word address) has an index
modifier, the number of steps is the number in parentheses.
*2) In the FP2/FP2SH/FP10SH, when the number “n” in a jump instruction has an index modifier, the number of steps
isthenumber in parentheses.
*3) In the FP2/FP2SH/FP10SH, when the number “n” in a loop instruction has an index modifier, the number of steps is the
number in parentheses.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com