Reference time for the filter replacement
(Service parts: P.50)
Replacement
period
Conditions
nanofiber HEPA
filter
Once every
3 years*
When 6 cigarettes have been
smoked daily. (Japan Electrical
Manufacturers' Association
standards JEM1467)
Deodorizing filter
* Filter replacement period may be greatly shortened,
depending on the use environment and conditions.
(For example, smoking is frequent.) When the effect
has faded, replace the filter.
Ɣ
After replacement, fill the date installing the filter in
the label and stick it on the back of the product.
Ɣ
Dispose of the used filter as inflammable garbage.
Attention
Ɣ
Do not operate the product with the nanofiber HEPA
filter removed.
(It may make it impossible to obtain the effect to clean air,
or may cause failure due to dusts entering the product.)
Ɣ
Do not operate the product with the deodorizing filter
removed.
(Doing so may cause insufficient deodorizing effects.)
Ɣ
Safely keep the parts removed from the product
when cleaning.
(Otherwise you may trip over them. Or the parts
may be damaged.)
When idle for a long time
Disconnect the power plug.
(The product consumes power even at rest.)
Empty the tank and tray and clean all the parts.
Dry their interiors completely.
(Otherwise, the product may fail due to rust.)
Ɣ
Dry the humidifying filter completely in the shade.
(Otherwise, fungus may occur.)
Cover the product with poly-bag, and keep in dry places.
(Do not keep it laid down or upside down, otherwise,
failure may occur.)
28
Before cleaning
Ŷ
Be sure to disconnect the power plug.
Ɣ
Do not use the detergents or
other substances on the right.
Ɣ
When using chemically treated
cloth, follow its instructions.
Care and maintenance
Dirt sensor
<about once every 3 months>
Wipe dirt off the lens with dry
cotton swab.
Ɣ
Regularly wipe the lenses (2 locations).
(The sensor may not work normally when it is
contaminated with moisture or tar of cigarette.)
Remove the
sensor cover.
Wipe dirt off with dry cotton
swab.
Dry cotton swab
Ɣ
Be sure to disconnect the power plug before
cleaning the sensor.
Ɣ
Do not insert the cotton swab anywhere other than the lens.
Ɣ
Illuminate the area when you do not see clearly.
Deodorizing filter
No maintenance required
,QVWDOODWLRQDQGUHPRYDOĺ3
If dust has accumulated around the deodorizing filter,
remove it with a vacuum cleaner or similar appliance.
nanofiber HEPA filter
<about once every 2 weeks>
Remove dust on the black surface
(the front side) with a vacuum
cleaner or similar appliance.
( Installation and removal
ĺ3
Ɣ
Do not apply excessive force because it is easy
to be damaged.
Ɣ
No maintenance is required on the white
surface (the rear side).
Ɣ
Do not wash with water.
Lay the filter on
newspaper etc.
nanofiber HEPA filter /
Dirt sensor
Lenses (2 locations,
left and right)
VXL95M_EN-ARA.indd 28
10/15/2015 5:47:43 PM
