MANUAL MASSAGE
Tapping and rolling massage
Choose the “ tapping rolling” or the “regional tapping rolling” mode.
The massage heads move to the most gentle position and the narrowest position and start the tapping
and rolling massage.
Use the “narrow”( ) or the “wide”( ) adjustment button to adjust the width of the massage heads.
To raise the massage heads, press the “up”( ) button. To lower them, press the “down”( ) button.
When you wish to stretch only a certain part of the back, choose the “regional tapping rolling” mode.
You can change the area by pressing( ) and ( ) buttons.
Massage intensity adjustment /
Hold your finger on the intensity adjustment button ( ) to choose the massage intensity desired.
When you adjust the massage intensity, the massage heads position may change.
Adjust the massage heads position again.
The massage heads stop automatically when they reach the maximum/minimum last intensity positions.
Release your finger from the button and operation will resume.
Adjustability for Manual Massage
14
Manual Mode
Up/down
Adjustment
upward/downward
23 1/16”
(600 mm)
1 3/4”
(45 mm)
Intensity
Adjustment
Width
Adjustment
tapping
23 1/16”
(600 mm)
1 3/4”
(45 mm)
3 5/16” or 4 5/16”
(85 or 110 mm)
rolling/tapping rolling
(stroke: 600 mm)
23 1/16”
(600 mm)
10/16”
(15 mm)
3 5/16” or 4 5/16”
(85 or 110 mm)
3 5/16” or 4 5/16”
(85 or 110 mm)
regional rolling/regional tapping rolling
(stroke: 600 mm)
23 1/16”
(600 mm)
10/16”
(15 mm)
Massage heads up-down and width adjustment / /
Adjust the vertical position of the massage heads.
Select the width of the massage heads.
NOTE: If the massage heads are forcibly locked, they will stop for safety and the controller panel will warn
you with blinking lamps.
Raise your back slightly and press the “start/reset” button.
15
Use the up or down adjustment button to adjust the up or down direction of the massage heads.
To raise the massage heads, press the “up”( ) button. To lower them, press the “down”( ) button.
The massage heads will move while holding your finger on the button.
When the massage heads have reached the desired position, release the button and the heads will stay in
that position.
Use the narrow ( ) or wide ( ) buttons to select the width between the massage heads (available only in
the tapping massage and rolling, tapping rolling).
EP790K230
説
14-15
