background image

012

ON/OFF Button

• Press this button to start the 

massage and to stop it at any 
time during the massage.

* The massage heads will not 

move until you press one of the 
Programmed Operation buttons 
or Manual Operation buttons.

* If this button is pressed during 

the massage, the massage 
heads will move to the retracted 
position and both the backrest 
and the legrest will return to their 
original positions. 

Ottoman Button

• Use this button to 

adjust the angle 
of the legrest.

Vibration ON/OFF Button

(EP3203 only)

Reclining Button

• Use this button to 

adjust the angle 
of the backrest 
and legrest.

Quick Stop Button

• Press this button to stop the 

massage immediately. 

  (The massage heads will stop in 

the position they are in without 
retracting and air will be released 
from the legrest.)

Voice Navigation Volume Switch 

(Located on the top side of the control 
unit.)

• Slide the switch to increase, decrease or 

cut voice navigation volume.

* Even when the volume is set to the OFF 

position you will still hear “beep” 
whenever you press one of the buttons.

* In the interests of safety the “beep-beep-

beep” sound cannot be eliminated.

Display

• The display shows the kind 

of massage selected.

Control Panel Cover

• Open the cover to manually 

select massage settings.

This feature provides a simple explanation of operating 
procedures and massage settings.

Example

• Explanation of Operating Procedures
  “Please select a pre-programmed or self-programmed massage from 

one of the blinking controls”.

• Explanation of Massage Settings
  “We will now scan your back”.  “The massage is starting”.
• Explanation of Program
  “The Shiatsu program is the strongest program”.  (When Shiatsu 

program is selected.)

Neck Roller Position 
Button

• Pressing this button 

allows the unit to adjust 
the shoulder position 
after searching the 
position of your body.  

Voice Navigation

11

10

WHEN YOU WANT TO USE THE MASSAGE LOUNGER RIGHT AWAY. (PROGRAMMED OPERATION)

USING THE MASSAGE LOUNGER

Display of Massage Areas

• Shows the massage areas 

currently being massaged by 
flashing.

Program Strength Display

• This displays the strength of 

the selected program.

Pressure Level Display

• This displays the amount of 

pressure exerted on the body.

Neck Roller Position  
Button

• Pressing this button allows 

you to adjust the shoulder 
position after body searching 
has been carried out.  

Movement Display

• This displays the program 

that is currently in use.

Program Strength Button

• Use these buttons to adjust 

the strength of the back 
massage or calf/foot 
massage.

1

2

1. Press .

• The Programmed Operation buttons (four) and the Self Program buttons will start to flash.
• The massage heads will not start to move until you press one of the program buttons.

2. Select the program you want.

• Please press one of the flashing buttons.
• See Page 13 for details regarding the content of each of these Programmed Operation.
• It is possible to change programs during the massage by pressing one of the other program buttons.

3. Sit as far back in the seat as possible with your head

on the pillow (back cushion/backrest).

Press the program button you desire to start the massage.  The seat will
automatically recline to the massage position and body searching will
commence.

• You will feel a light tapping sensation on your shoulders.  Always check the

shoulder position and when necessary adjust it manually with the neck roller
position button. 

• Body searching can be carried out for people with a height of 4.6 ft (140 cm) to

6.1 ft (185 cm). 

After body searching has been completed the massage will commence. 

• The air massage on the legs/calf will commence at the same time that body

searching commences.  

• You can freely adjust the angle of the backrest and legrest. 
• Slide the legrest to adjust the position of your knees and calves. (See Page 14)

• This program uses mainly Shiatsu massage

to provide a strong massage that is ideal for
people who have extremely stiff shoulders,
etc.

• This program uses kneading massage to

thoroughly relax stiff muscles in many areas.
Still a strong massage.

• This program uses a gentle massage to help

soothe tired body with a gentler, longer
Swedish style massage strokes. 

• This is a more general program using a variety

of massage movements to help refresh people
when they’re feeling tired. Mixes both Shiatsu
and Swedish.

• If the massage lounger is reclined further than

this angle then it will not automatically recline.  

Reclined approximately 11°.

Raised approximately 50°.

Correct Massage Position

CONTROL PANEL

Go to any one of the following sections if you want to start the massage lounger immediately.

When you want to use the massage lounger straight away.
PROGRAMMED OPERATION (shiatsu, deep, gentle, refresh)

This program is ideal for the following people:

• Those who feel tired all over.
• Those who want to operate the massager simply by using one of the 15 minute stored programs.

When you want a massage suited to your degree of fatigue.
SELF PROGRAM

This program is ideal for the following people:

• Those who feel tired in different parts of their body.
• Those who want only their shoulders or legs massaged.  This program allows the user to customize the massage. (See Page 15)

USER ADJUSTMENT FUNCTIONS

When you want more control over individual massage settings.
MANUAL OPERATION (open the control panel)

This program is ideal for the following people:

• Those who want to massage a certain area using a certain kind of massage. 
• Those who want to make many different adjustments to massage settings.

Summary of Contents for EP3203 - MASSAGE LOUNGER - MULTI-LANG


















Reviews: