background image

3

2

SAFETY PRECAUTIONS

WARNING: To avoid the risk of injury:

1. Pregnant women, people who are ill, in poor physical shape or undergoing medical treatment, and people

suffering from back, neck, shoulder or hip pain should consult their doctor before using the unit.  If you have a
pacemaker, defibrillator, or other personal medical device, consult with the manufacturer of your device before
using the unit.  Your physician may be able to assist you in obtaining this information.  

2. Sit down slowly after checking the position of the massage heads.  Never put any part of your body between

the massage heads as the squeezing action of the massage heads may cause injury.  Never put your fingers or
feet in the gap between the backrest and seat, the backrest and the armrest, the seat and cover under the
armrest, or the gap between the legrest and the footrest.  Do not place your fingers or any part of your body in
the mechanism below the legrest, or between the legrest and footrest.

3. Do not use the unit against bare skin.  While thin clothing may increase effectiveness, exposing the skin directly

to the massager may irritate the skin.  
Do not use the unit while wearing anything hard on your head like a hair accessory, etc.  

4. Do not use the unit for massaging the head, abdomen, front neck, elbows or knees.  Do not use excessively

strong massage action on the back of the neck.  

5. When using the body searching function, always ensure that the shoulder position is correct.  If the shoulder

position is not correct, use the Neck Roller Position Adjustment Button to adjust it properly.  You can adjust the
shoulder position in this way in the Programmed Operation, Self Program and Rolling in the Manual Operation.
Failure to align the shoulder position correctly can lead to injury.  

6. Do not stretch the back muscles for more than approximately 15 minutes at a time.  To avoid overstretching the

muscles which may result in discomfort, do not use the unit for more than 5 minutes when first using it.  You
can gradually increase the duration and strength of the massage as you become used to it.  
Do not massage any one point for more than 5 minutes at a time.  
Excessive massaging can overstimulate the muscles and nerves and result in an adverse effect.  
To prevent excessive massaging, do not use the massager for more than a total of 15 minutes each session.
After approximately 15 minutes, the massage heads will be retracted and stop moving. The back cushion can
be removed if you want to experience a stronger back massage. Exercise extreme care when you use this
mode in order to avoid back pain or injury. Use only for short periods of time (no more than 15 minutes).
Reinstall the back cushion if you want to restore to normal massage intensity.

7. While using the massager, if you start feeling sick or if the massage seems painful, stop using it immediately.  

While using the massager, if the pressure seems too strong, the movement of the massage heads can be
stopped at any time by pressing the Quick Stop Button.

8. Do not go to sleep while using the unit.  Do not use the unit after drinking alcohol.  

9. When the seat back is in a reclined position, do not sit on it or sit with your legs resting on the headrest.  

Do not sit on the legrest as the unit may fall over.

10. Do not allow children or pets to play on or around the unit, especially during operation.  

11. Do not unplug the unit or turn it off during operation.  Unplug the unit immediately if there is a power outage.  

12. Be sure to start on the gentle massage program if using the massager for the first time.  The shiatsu massage

is stronger and should be enjoyed after one has gotten accustomed to the chair.

13. Do not allow children to play on this mechanized furniture or operate the mechanism. Legrest folds down on

closing so that a child could possibly be injured. Always leave in an upright and closed position. Keep hands
and feet clear of mechanism. Only the occupant should operate it.

OPERATING PRECAUTIONS

WARNING: To avoid damaging the chair, follow these precautions:

1. The chair is designed for a maximum user weight of 264lbs (120k

g

).  Exceeding the maximum weight may

cause permanent damage to the massage mechanism and/or other components of the unit.  Any such damage
is deemed to be user abuse and is not covered under the Limited Warranty.  

2. Do not sit on or drop the control panel.  Do not pull the control panel cord or the power cord.  Be careful not to

catch the cord of the control panel between the armrest and the chair back.  

3. Do not treat the chair roughly, such as turning the chair on its side, turning the chair over or standing on it.  

4. Do not treat the covering roughly.

• Keep sharp or pointed objects away from the covering of the chair.  Be careful not to drop lit ashes, lit

cigarettes or matches on the chair.  

• Exposure to direct sunlight can cause fading or a change in color of the covering.

5. If the massager functions abnormally, immediately turn off the power and have the massager checked by an

authorized service center.

6. Do not attempt to repair the massager yourself.  

7. Do not repeatedly operate any switch at short intervals.  Such action may cause the switch to malfunction.

8. Some noise may be heard coming from the massager while in use.  This is due to the structure of the

massager and is normal.  

9. Make sure there are no obstacles behind the chair before reclining it.  The chair can be reclined to a maximum

angle of 170°.  If the back hits a wall or pillar, the chair may malfunction.  Be sure to have ample space behind
the chair.  Recline the chair slowly in order to avoid contact with an obstacle.  

10. When excessive pressure is applied to the massage heads, they may stop moving for safety.  When moving

the heads up from the lowered position, one’s body weight may stop the heads’ movement.  In such case,
slightly raise your body and allow the massage heads to move up.  

11. After each massage, slide the power switch, which is located on the right side of the chair, to the “off” position

and turn its lock switch to the “lock” position.  

12. Do not sit on the chair with wet body or hair.

13. The unit must not be used in “wet rooms” (sauna, swimming pool) or outdoors.

Summary of Contents for EP3203 - MASSAGE LOUNGER - MULTI-LANG


















Reviews: