15
14
WHEN YOU WANT TO CREATE YOUR OWN MASSAGE PROGRAM (SELF PROG.)
Degree of Fatigue Display
• This is used in the Self Program to
indicate how tired you are in each
area of your back and legs.
Program Strength Display
• This displays the strength of
the selected program.
Please ensure that the cover
is closed securely.
Pressure Level Display
• This displays the amount of
pressure exerted on the body.
Neck Roller Position
Button
• Pressing this button allows
you to adjust the shoulder
position after body searching
has been carried out.
Movement Display
• This displays the program
that is currently in use.
1
2
3
Display of Massage Areas
• The massage points currently
being massaged flash.
1. Press .
• Programmed Operation buttons (four) and the Self Program buttons will start to flash.
2. Press .
• The Degree of Fatigue indicators on the display will all start to flash on the neck area.
• The massage heads will not start to move until you press
.
* It is not possible to use the Self Program if the cover of the control panel is not completely closed.
3. Select the degree of Fatigue.
(1) Press
to select the desired area of the body. The button will toggle down each time you press it.
(2) Press
to select the degree of fatigue.
(3) Press
after you have finished inputting settings for the various parts of the body.
The massage lounger will automatically create the massage program best suited to the information you have input.
Your selections will not be recorded until you have pressed
.
—— NECK
—— SHOULDER
—— BACK
—— LOWER BACK
—— LEGS
• The area of the body selected will start to flash.
The degree of fatigue will decrease as you continue to
press the button.
After reaching the minimum setting, if you press the
button again it will return to the maximum setting.
The greater your selection, the more time and movement
will be spent on that area. (See Page 18 for examples.)
1. Hold down
until you reach the desired angle.
• Holding the button down will recline the seat and raise the legrest.
• Shortly after the backrest starts to recline the legrest will be raised.
• When both the backrest and legrest have been raised or lowered as far
as possible you will hear a “beep-beep-beep” sound.
• The backrest and legrest may reach their limits at different times.
• Adjust the position of the back cushion so that it does not come into
contact with your elbows.
2. Release
when you have reached the desired
position.
• If you have reclined the back more than you want, press
to raise it
again.
• Do not recline the back too far when first using the unit as you may find
the massage to be too strong.
Raising the Backrest and Legrest
Hold down
to raise the backrest and legrest
• When both the backrest and legrest have been raised as far as
possible you will hear a “beep-beep-beep” sound.
ADJUSTING THE SEAT
Raising and Lowering Only the Legrest
Raising the Legrest
Hold down
to raise the legrest.
• When the legrest has been raised as far as possible you will hear a
“beep-beep-beep” sound.
Lowering the Legrest
Hold down
to lower the legrest.
• When the legrest has been lowered as far as possible you will hear a
“beep-beep-beep” sound.
• Ensure that the legrest slide has been fully retracted before lowering
the legrest otherwise it will hit the floor (see below).
Extending the Legrest
1. Slide the legrest out to the desired position by
pulling the legrest slide lever.
2. Release the legrest lever.
Reclining the Massage Lounger
1
2
Approx. –5°
Approx. 85°
Approx.
170°
Approx. 120°
Push the legrest
down with the backs
of your legs.
Legrest Slide Lever
Once you have released the legrest
slide lever the legrest will click into
place and lock.
When you wish to retract the legrest, pull the legrest slide lever to
release the legrest. Raise your legs slightly to allow the springs to
retract the legrest.
