background image

Additional Information

13

12

Display of Massage Areas

Sometimes the massage areas displayed on the control panel will be different from what
you are actually experiencing.

* Due to limitations in the size of the display, the massage areas displayed on the control

panel are only a general indication of the area being massaged.  This means that sometimes
the areas that are actually being massaged are different from those shown on the display.
Areas of massage displayed may change depending on changes to massage intensity or
position of massage heads.

Pressure Level Display

The pressure being applied to the body is shown on the display.

• The actual pressure experienced may vary from the level indicated on the display.
• Depending on the seatback fabric, the pressure level indicated may change even when nobody is sitting in the seat.

Pressure Feedback Function

The strength of the massage (pressure level) is automatically adjusted if it is too much or too little. 

• The standard body pressure level varies according to the strength of the program selected.

Programmed Operation

• Please see Page 25 for details regard the lower body massage.
• The movements below are shown in simplified form for the sake of illustration.

 Shiatsu C and 

Shiatsu A

 Tap A and Roll

 Shiatsu A, 

    Shiatsu C and 
    Tap A

 Shiatsu A,

    Shiatsu B and 

Knead A

 Knead B and Roll

 Shiatsu C, 

    Shiatsu A and 

Knead B

 Knead A and 

    Tap B

 Shiatsu B, Tap A 

and Knead B 

 Tap B, Knead B 

and Roll

 Shiatsu A and 

    Knead B

 Swedish and Roll

 Knead A and 

Knead B

 Knead A and 

    Tap B

 Knead B and Roll

 Shiatsu A and 

Knead B

 Knead A and 

    Tap B

 Knead B and 

    Shiatsu B

 Swedish, Roll 

and Tap B

 Knead B and 

Swedish

 Knead B and 

    Tap A

 Knead B and Roll

 Swedish, Knead B 

and Tap B

 Knead A, Tap B 

and Knead B

 Tap B, Swedish 

and Knead B

 Knead B, Knead A 

and Tap B

 Knead A, Knead B, 

Swedish and 

    Tap B

 Swedish, Roll 

and Tap B

 Shiatsu A and 

Knead B

 Tap A and Roll

 Knead B, Tap A 

and Shiatsu A

 Knead A, Tap B, 

Roll and Tap B

 Knead A and 

    Tap A

 Knead B, Tap B 

and Tap C

 Knead B 

 Tap C, Roll, 

    Tap B and Roll

 Swedish and Roll

Shiatsu Program

Deep Program

Gentle Program

Refresh Program

4. After the Massage has been Completed the Unit will Automatically Stop.

After the designated program has been completed the massage lounger will automatically stop.  
(Approximately 15 minutes.)

Stopping the Massage during a Program

• Press again.
• The legrest will automatically be lowered and the massage heads will return to the retracted position.

After the massage heads have stopped moving the backrest will return to the original position.

Stopping the Massage Immediately

• Press 

if you want to stop the massage immediately.

• All movement will immediately stop.
• Please press 

twice in order to return the massage heads to the retracted position.  

* After the program has been completed the voice navigation will provide information regarding user program functions and

will flash.  

Adjusting the Strength of the Back Massage

Please press 

to adjust massage strength.  

Adjusting the Strength of the Leg/Calf Massage

Please press 

to adjust massage strength.  

3-Stage
Adjustment

* When the strength is set to 0 (i.e. no bars are lit on the display)

the leg/calf air massage will stop and change to the back
massage only.

Body Searching — Adjusting Shoulder Position

The massage rollers will rise up the back until
they reach the area behind the neck, after
which they will descend to the level of the
shoulders where soft tapping will be carried
out for approximately 10 seconds. 

Turning off Vibration

Please press 

to stop the vibration in the desired area.  Press it again to restart it.

(EP3203 only.) 

Soft Tapping

Too High

Correct Position

Too Low

Use the Neck Roller Position Adjustment button
to properly set the shoulder position while soft
tapping is being carried out.  

Pressing one of the buttons
once will raise or lower the
massage heads by approxi-
mately 11/16" (1.8cm).  

• When there is nobody sitting in the seat or when body searching has not been carried out successfully, “massage

terminated” will be announced and the soft tapping will stop.  If this happens then please sit as far back as possible with
your head on the pillow (back cushion/backrest) and push 

to carry out body searching again. 

• When someone else wishes to use the massage lounger midway through a massage, please push 

to stop the

massage and start from the beginning again as the shoulder position will vary from person to person.

Down

Up

Summary of Contents for EP3203 - MASSAGE LOUNGER - MULTI-LANG


















Reviews: