RQTC0156
17
Changing the pla
yer settings
SETTING STATE
Display the current setting of the items below
TV ASPECT
Choose the setting to suit your
television and preference.
4:3PAN&SCAN 4:3LETTERBOX 4:3ZOOM
16:9NORMAL 16:9SHRINK 16:9ZOOM
TV TYPE
Select to suit the type of television.
STANDARD CRT LCD PROJECTION PLASMA
TIME DELAY
When connected with an AV amplifier and Plasma display, adjust
if you notice the audio is out of sync with the video.
0 ms 20 ms 40 ms
60 ms 80 ms 100 ms
NTSC DISC OUT
Choose PAL60 or NTSC output
when playing NTSC discs.
NTSC
: Output signals from NTSC discs remains as NTSC.
PAL60
: NTSC discs can be viewed on PAL television.
: “NTSC” is the factory preset.
STILL MODE
Specify the type of picture
shown when paused.
AUTO
FIELD:
The picture is not blurred, but picture quality is lower.
FRAME:
Overall quality is high, but the picture may appear blurred.
VIDEO OUT-SCART
5
Choose the video signal format
to be output from the SCART
and COMPONENT VIDEO
OUT terminals
VIDEO/YPbPr
S-VIDEO/YPbPr
RGB/NO OUTPUT
VIDEO OUT (I/P)
Select “PROGRESSIVE” only
if connecting to a progressive
output compatible television.
INTERLACE
PROGRESSIVE
When you select “PROGRESSIVE”, a message screen will appear.
For progressive output, press [
e
] and then press [OK].
Press [RETURN] to cancel.
•
•
1
Shows
Setup
menu.
Select
Register
2
Select the
menu
.
3
Select the
item.
Make the
settings.
4
5
Press to
exit.
Select
Select
Register
“DISC” menu
SETTING STATE
Display the current setting of the items below
AUDIO
Choose the audio
language.
ENGLISH (LANGUAGE OPTIONS)
1
ORIGINAL
2
OTHER ----
3
SUBTITLE
Choose the subtitle
language.
AUTO
4
ENGLISH (LANGUAGE OPTIONS)
1
OTHER ----
3
MENUS
Choose the language
for disc menus.
ENGLISH (LANGUAGE OPTIONS)
1
OTHER ----
3
RATINGS
Set a ratings level to
limit DVD-Video play.
Setting ratings (When level 8 is selected)
0 LOCK ALL:
To prevent play of discs without ratings
levels.
1 to 7:
To prohibit play of DVD-Video with corresponding
ratings recorded on them.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video
exceeding the ratings level is inserted in the unit. Follow
the on-screen instructions.
PASSWORD
Change the password
for “RATINGS”
(
above).
1. Select “CHANGE” and press [OK].
2. Enter the current password with the numbered buttons,
then press [OK].
3. Enter the new password with the numbered buttons,
then press [OK].
If “VERIFY” is displayed, please verify the password
and insert it again.
Register
OK
OK
OK
1
2
3
5
6
7
8
9
0
4
The settings remain intact even if you switch the unit to standby.
Underlined items are the factory preset.
•
•
“VIDEO” menu
The QUICK SETUP enables successive settings of the items in the shaded area.
Changing the player settings
Asia
RQTC0156-B.indd 17
2007-12-29 10:13:47
