83
RQT9089
Setting Men
us
HDMI Settings
1
Press [OK] to show the following settings.
HDMI Video Format
2
You can only select items compatible with the connected
equipment. If you are concerned about output picture quality, it
may be improved by changing the setting.
[576i/480i] [576p/480p] [720p] [1080i]
[1080p]
When outputting 1080p signal, we recommend using
High Speed HDMI Cables that have the HDMI logo
(as shown on the cover) and are less than 5 meters
to prevent video distortion etc.
[Automatic] Automatically selects the output resolution best suited
to the connected television (1080p, 1080i, 720p,
576p/480p or 576i/480i).
Aspect for 4:3 Video
To play a 4:3 title when connected with an HDMI cable, set how
to show pictures on a 16:9 widescreen television. 4:3 picture from
HDMI output will be slightly smaller than that from the other outputs,
e.g. Scart and component, this is not a malfunction of the unit.
[4:3]
Picture output expands left or right.
[16:9]
Picture is output as original aspect with side panels.
Digital Audio Output
[HDMI and Optical]
[Optical Only]
Select when this unit is connected to an
amplifier with an optical digital audio cable
(
➔
88) and connected to a TV with an HDMI
cable (
➔
12) and you want to enjoy the
highest quality of audio from discs.
VIERA Link
[On]
[Off]
Select when you do not want to use “HDAVI
Control”.
•
AV1 Output
Set according to the terminal of the connected TV.
Select “Video (with component)” or “S Video (with component)”
for component output (progressive output).
Set according to the signal and terminal of the connected TV.
[Video (with component)]
Select when a TV is connected that can receive a composite signal.
[S Video (with component)]
Select when a TV is connected that can receive an S Video signal.
[RGB 1 (without component)]
Select when a TV is connected that can receive an RGB signal.
If you always would like to view the picture from the unit in RGB
signal, select this mode. The TV screen will automatically switch to
display the picture from the unit when the unit is turned on.
[RGB 2 (without component)]
Select when a TV is connected that can receive an RGB signal.
If you would like to switch to display the picture from the unit only
when playback or viewing menus, select this mode.
If this unit is connected with an HDMI cable, you cannot select
“RGB 1 (without component)” or “RGB 2 (without component)”.
•
AV2 Settings
Set to match the connected equipment.
Press [OK] to show the following settings.
AV2 Input
Set to “RGB/Video” or “RGB” when receiving or recording RGB
output from external equipment.
[RGB/Video]
[RGB]
[Video]
[S Video]
The unit automatically detects whether the input signal
from the AV2 terminal is an RGB signal or other signals
and makes settings.
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (
➔
82).
[Ext Link 1] When this unit is connected to a satellite receiver with
a 21-pin Scart cable and this unit receives a control
signal.
Start and stop timings of recording are controlled by
the control signal.
[Ext Link 2] When external equipment with a timer function is
connected.
Recording is continued while the image signal is being
sent to the unit from the external equipment.
Recording is stopped when the image signal is halted
by turning the external equipment off.
•
1 Depending on the connected equipment, some items may be
shaded in grey on the display and cannot be selected, or you may
not be able to change the settings.
2 Choose the setting to suit your TV and preference.
VHS
e
,
r
select “VHS”
➔
q
➔
e
,
r
select item
➔
Setup
Picture
Sound
Display
Connection
VHS
Tuning
Others
RETURN
SELECT
TAB
Disc
Tape Length
Auto (E-240)
Automatic
SQPB
Tape Length
Set the length of the tape you are using so the unit can show the
correct remaining time.
[Auto (E-240)] The unit automatically distinguishes E30, -60, -90,
-120, -180, and -240 tapes.
[E-195]
For E195 tape
[E-260]
For E260 tape
[E-300]
For E300 tape
SQPB
To play back video cassettes recorded in S-VHS format (SQPB;
S-VHS Quasi Playback)
[Automatic]
This unit automatically detects the format in which
the recording was made and selects the same format
for playback. However, picture distortion may appear.
Therefore, set to [On] or [Off].
[On]
Use this setting when playing back a cassette tape
recorded in the S-VHS format.
[Off]
Use this setting when playing back a cassette tape
recorded in the VHS format only.
RQT9089-B̲DMR-EX98V̲EB.indb 83
RQT9089-B̲DMR-EX98V̲EB.indb 83
2008/04/23 19:01:25
2008/04/23 19:01:25
