79
RQT9089
Setting Men
us
Tips
To browse through the list
Press [
1
2
CH].
Auto-Setup Restart
You can restart auto channel setting for digital terrestrial channels
if set up (
➔
13) fails for some reason.
However, if you perform “Auto-Setup Restart”, all channel settings
and all created profiles are deleted.
Press [
w
] to select “Yes”, then press [OK].
Tips
You can also use the following method to restart Auto-Setup.
(All the settings except for the ratings level, ratings password,
Owner ID and Clock return to the factory preset. The timer
recording programmes are also cancelled.)
When the unit is turned on and stopped, press and hold
[CH
1
] and [CH
2
] on the main unit simultaneously for about
5 seconds.
– Auto-Setup screen appears.
•
DVB Manual Tuning
You can set channels manually if the DVB Auto Setup could not
complete successfully.
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Edit Profiles
Auto-Setup Restart
Others
VHS
OK
RETURN
TAB
SELECT
DVB Manual Tuning
Add New DVB Services
Signal Condition
DVB Manual Tuning
Frequency
MHz
Prog.
Quality
Channel Service Name
Net ID TS ID
RETURN
0
10
0
10
DVB CH21
474,0
Signal Quality
Signal Strength
Channel System
United Kingdom
OFFSET
START SCAN
CHANNEL
1.
Press [
e
,
r
] to select the channel you want to set.
Select the channel by checking the signal strength and
signal quality displays.
[Refer to “Signal Condition” (
➔
right) for signal strength and
signal quality.]
2.
Press [OK] to start scan.
The set channel is displayed in the table.
DVB Manual Tuning
Frequency
MHz
Prog.
Quality
Channel Service Name
Net ID TS ID
RETURN
0
10
0
1
7
514
12290
12290
12290
514
514
7
7
22
BBC ONE Wales
BBC 2W
BBC THREE
3 services found.
22
22
2
3
10
DVB CH21
474,0
Signal Quality
Signal Strength
Channel System
United Kingdom
START SCAN
CHANNEL
3.
Press [EXIT] and press [
1
2
CH], check that applicable
channels have been selected.
–
Add New DVB Services
You can search for newly added digital terrestrial channels to
receive.
Setup
Disc
Picture
Sound
Display
Connection
VHS
Tuning
Edit Profiles
Auto-Setup Restart
Others
OK
RETURN
TAB
SELECT
DVB Manual Tuning
Add New DVB Services
Signal Condition
Add New DVB Services
Please wait!
Ch 21
68
Prog.
Quality
Channel Service Name
Net ID TS ID
RETURN
RETURN: to cancel
The unit starts searching for newly available digital terrestrial
channels. This takes about 5 minutes.
The bar over the table shows you the search progress.
At the end of the search, the number of found new digital
stations appears.
“No new services found.”, is displayed when
no new services can be found.
Press [OK] to save the newly found channels.
Tips
To cancel in middle
Press [RETURN].
The channels found before stopping are not saved.
–
–
–
Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When “Signal Condition” is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press
[
1
2
CH] to select a digital channel. “D” appears on the
unit’s display.
3 Display the Setup menu again.
Setup
Disc
Picture
Sound
Connection
Display
VHS
Tuning
Edit Profiles
Auto-Setup Restart
Others
OK
RETURN
TAB
SELECT
DVB Manual Tuning
Add New DVB Services
Signal Condition
Signal Quality
0
10
Signal Strength
0
10
2 BBC 2W DVB CH30
RETURN
CH +
CH –
The quality and strength of the signal are shown.
Press [
1
2
CH] to select the other channel.
Signal Quality
Below 2 (display red):
The signal quality is so poor that there may
be interference in the pictures and sound.
2–5 (display orange):
The signal quality is basically adequate,
but brief interference in the pictures and
sound is possible in isolated case.
Over 5 (display green): Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. “0” means signal strength
0%, “10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
When the signal is weak:
check that the aerial is correctly positioned.
adjust the aerial reception with “DVB Manual Tuning” in the
Setup menu (
➔
left).
check that the current digital broadcast channel is correctly
broadcasting.
•
–
–
–
RQT9089-B̲DMR-EX98V̲EB.indb 79
RQT9089-B̲DMR-EX98V̲EB.indb 79
2008/04/23 19:01:20
2008/04/23 19:01:20
