Convenient functions
SQT0815
76
Basic Settings
Settings for USB HDD
USB HDD Registration
Register the USB HDD. (
>
68)
USB HDD Disconnection
This function puts the USB HDD in a state in
which it can be safely disconnected. (
>
67)
USB HDD Management
Press and hold [OK] for 3 seconds to show
the following settings.
Delete all titles
Delete all titles on the USB HDD.
• Delete does not work if one or more titles
are protected.
Format USB HDD
Formatting deletes all contents, and
they cannot be restored. Check
carefully before proceeding.
Cancellation of all USB HDD Registrations
This function cancels the registrations of all
the USB HDDs registered on this unit.
Only do this if you are going to dispose of this
unit.
• Before operation, perform “USB HDD Disconnection”
(
>
above) and remove the USB HDD.
• It is not possible to play back the content from a
USB HDD whose registration has been cancelled.
Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected. (The
picture is clearer and finer.)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
-
[BD-V]
: Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when File Conversion (
>
49).
DMR-PWT550GLGZ_eng.book 76 ページ ２０１５年２月２日 月曜日 午後７時２６分
