Getting started
SQT0815
16
Control reference guide
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2
Open/close disc tray
3
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4
Disc tray
5
USB port
6
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
Pull to flip down
the front panel.
Display
SD card
USB memory
Disc
Display
1 Drive (HDD, BD or SD) indicator
2 Disc indicator
3 Copying indicator
4 USB port indicator
5 SD card slot indicator
6 Remote control signal indicator
7 Timer recording indicator
This indicator lights up when the timer
recording standby is activated.
8 Main display section indicator
- Current time
- Playback counter
- Various messages (
>
95), etc.
9 Playback indicator
10 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
PLAY
COPY
SD
USB
HDD
SD
BD
1
2
5
6
7
4
3
8
9
10
DMR-PWT550GLGZ_eng.book 16 ページ ２０１５年２月２日 月曜日 午後７時２６分
