Key operation
(rem ote control keys)
M ode nam e
FL display
(E xam ple)
D escriptions
[4] [9]
(Please follow the pro
cedure and operate.)
DVD Playback Jitter
***
The amount of the LBA jitter at the position in which the
playback began from the stop is measured.
[Procedure]
1. Playback start.
(Use playback possible disc.)
2. The playback point is moved to the place to be measured.
(Use [SKIP] and [SLOW/SEARCH] button)
3. Push the [PAUSE] button, at the position to be measured.
Afterwards, the following operation is done.
[STOP] - [PLAYBACK] - [STILL]
4. Press remote control buttons [4] [9].
5. The amount of jitter is displayed.
[5] [5]
CEC(H) Output Check
CE C H O K
C EC HNG
Check of the CEC terminal high output of HDMI.
[5] [6]
CEC(L) Output Check
C E C LO K
CECLNG
Check of the CEC terminal low output of HDMI.
[6] [5]
Quick analysis error
history
DRV NG
According to the error history, the loaded drive failures
occurred within 4 weeks.
(The result is valid that the date is set correctly.)
DRV OK
According to the error history, the loaded drive failures
occurred more than 4 weeks.
(The result is valid that the date is set correctly.)
OK
No error histories
NO DATA
No information
[6] [6]
Save the log spool to
SD card
The user operation
history of the remote
control is saved to the
SD card.
NO DATA
No information
ERROR
The log spool cannot be saved to SD card.
N O CARD
The SD card cannot be recognized.
FIN
Save end
[6] [9]
Save the error history
and log spool to SD
card
The error and user
operation history of the
remote control are
saved to the SD card.
NO DATA
No information
ERROR
The error history and log spool cannot save the SD card.
N O CARD
The SD card cannot be recognized.
FIN
Save end
[9] [1]
Open and Close test of
the disc tray
******
(000003)
Repeat the opening and closing the disc tray.
(The current numbers of Open/Close is displayed on the FL
display.)
Press the [Power] button (Remote Control or unit) for exit the
test.
[9] [5]
Initialization of the
Laser Used Time
CLR
Laser Used Time information stored in the memory of the unit
is initialized to factory setting.
[9] [6]
Initialization of the Last
Drive Error
CLR
Last Drive Error stored on the BD Drive is deleted.
[9] [7]
Initialization of the Error
History
CLR
Error History information stored on the unit is deleted.
[9] [8]
Initialization of the Error
Code
CLR
Last Error Code information stored by timer is deleted.
[9] [9]
Initialization of the
Service Mode
CLR
Last Drive Error, Error History and Error Code information
stored on the unit are initialized to factory setting.
22
Summary of Contents for DMP-BD45EE
