Panasonic DMP-BD45EE, Service Manual

Page: 24 / 75

E rror Code Diagnosis contents Description FL display On Screen
U76
connection error
This error is displayed when
equipment such as TV, amplifier etc.
connected with this unit with the
HDMI cable do not correspond to
the copyright protection.
(The BD/DVD video where the
copyright is protected cannot be
played.)
U76 Not displayed
U77
Illegal disc error
This error is displayed when it
becomes impossible to reproduce
because of copyright illegal
information.
U77
Not displayed
U88
Restoration is operating
(When the disc is in the
disc tray)
This error is displayed when there is
a disc in the disc tray or abnormality
is confirmed during playback. It is
shown that the restoration to return
the unit operation normally is
operating.
It becomes possible to use as soon
as not the breakdown but the U88
display disappears.
U88 Not displayed
F00
No error information
Initial setting for error code in
memory.
(Error code Initialization is possible
with error code initialization and
main unit initialization.)
No automatic display.
It can be displayed in
service mode pressing [0]
[11-
Not displayed
F34
Microprocessor
initialization error
When detected, the power is turned
off forcibly, but the event is saved in
memory.
No automatic display.
It can be displayed in
service mode pressing [0]
[11-
Not displayed
F58
Drive hardware error
This error is displayed when drive
unit error (motor errors, traverse
unit error, etc.) is detected. The
power is turned off forcibly, but the
event is saved in memory.
No automatic display.
It can be displayed in
service mode pressing [0]
[1].
Not displayed
F74
HDIM Device Key
Communication error.
HDMI connection could not be
authenticated due to a transfer
malfunction.
Factor of HDMI Device key-load
failure
- When HDMI LSI is damaged.
- When device key information
recorded is damaged.
F74
Not displayed
F75
HDMI Device Key
Information error
HDMI connection could not be
authenticated due to an internal
data malfunction.
Factor of HDMI Device key-load
failure
- When HDMI LSI is damaged.
- When device key information
recorded is damaged
F75
Not displayed
F99
Hang-up
Displayed when communication
error has occurred between Main
microprocessor (IC51001) and
Timer microprocessor (IC57001).
F99
Displayed is left until the
[POWER] button is
pressed.
Not displayed
24