Panasonic DMP-BD45EE, Service Manual

Page: 30 / 75

10.2. BD Drive
Caution:
When disassembling the BD Drive, worn the anti-static
wrist strap then be care to electrostatic discharge for pre­
vention of the electrostatic damage to optical pick-up.
10.2.1. Upper Base Ass’y
1. Remove the 4 Screws (A), and push the Hook in.
Screw (A)
2. Lift up the Upper Base Ass'y, and pull it out to the direc­
tion of arrow.
10.2.2. Tray
1. Perform the step “10. 2. 1. Upper Base Ass'y”.
2. Insert the paper clips, etc. into the hole of the bottom side,
and slide it to the direction of arrow until it can be.
Paper clips, etc.
3. Pull the Tray to the direction of arrow until it can be.
4. Insert the paper clips, etc. into the hole of the Tray at 45
degrees, and lean it to the direction of arrow with pushing
the dotted point of the tray forward.
Hole
30