VQT2S62
86
Advanced (Recording pictures)
∫
About [B] (Bulb)
If you set the shutter speed to [B], the shutter stays open while the shutter button is
pressed fully (up to about 4 minutes).
The shutter closes if you release the shutter button.
Use this when you want to keep the shutter open for a long time to take pictures of
fireworks, a night scene etc.
•
If you set the shutter speed to [B], [B] is displayed on the screen.
•
When you take pictures with the shutter speed set to [B], use a sufficiently charged battery.
(P21)
•
We recommend using a tripod or the remote shutter (DMW-RSL1; optional) when you take
pictures with the shutter speed set to [B]. Refer to P160 for information about the remote
shutter.
•
When you take pictures with the shutter speed set to [B], noise may become visible. To avoid
picture noise, we recommend setting [LONG SHTR NR] in the [REC] Mode menu to [ON]
before taking pictures. (P120)
•
The Manual Exposure Assistance does not appear.
Note
•
The brightness of the LCD monitor/Viewfinder may differ from the brightness of the actual
pictures. Check the pictures using the playback screen.
•
If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
•
[
‡
], [
], [
] and [
] for flash cannot be set.
•
The [SENSITIVITY] is automatically set to [ISO100] when you switch the Recording Mode to
Manual Exposure while the [SENSITIVITY] is set to [AUTO] or [
] (Intelligent).
•
If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down.
•
When you use a lens with an aperture ring, the aperture ring setting takes priority.
DMC-G10KPP-VQT2S62_eng.book 86 ページ ２０１０年４月２３日 金曜日 午後８時０分
Summary of Contents for DMCG10K - DIGITAL CAMERA/LENS KIT
Page 199: ...199 VQT2S62 Others Others ...