83
VQT2S62
Advanced (Recording pictures)
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
Press
2
/
1
to select [MULTI FILM].
Select either [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3] with
3
/
4
, and then select the film
to be set for each with
2
/
1
.
•
You can also use the rear dial to set.
•
[OFF] can be selected only for [MULTI FILM 3].
Press [MENU/SET] to set.
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
Focus on the subject and take a picture.
•
It will continuously take pictures by keeping the shutter button pressed when it is set to
Burst Mode. (Up to 3 pictures)
•
When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [
] even if it is set to [
].)
•
Multi film indication ([
]) displayed on the screen will flash until all pictures of preset
amount are taken.
Note
•
[STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
•
White Balance Bracket will be disabled when the Multi Film Bracket is set.
•
Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
Multi Film Bracket
DMC-G10KPP-VQT2S62_eng.book 83 ページ ２０１０年４月２３日 金曜日 午後８時０分
Summary of Contents for DMCG10K - DIGITAL CAMERA/LENS KIT
Page 199: ...199 VQT2S62 Others Others ...