VQT2S62
80
Advanced (Recording pictures)
¢
When the [ISO LIMIT SET] of [REC] Mode menu (P119) is set to anything except [OFF],
it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [OFF].
•
When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on
brightness within a maximum setting of [ISO400].
•
When setting to [
], ISO sensitivity will adjust automatically depending on brightness
within the maximum setting of [ISO800]. ([ISO400] when the flash is used)
∫
About [
] (Intelligent ISO sensitivity control)
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
•
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully. Confirm
the actual shutter speed on the information display for the picture being played back.
Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
•
Refer to P60 for the flash range.
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [
] is selected.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
The setting is fixed to [
] in the following cases.
–
In [BABY1]/[BABY2] and [PET] in Scene Mode
–
In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR
SPORTS] in Advanced Scene Mode
•
Program Shift cannot be activated when the ISO sensitivity is set to [
].
•
You cannot select [
] in Shutter-Priority AE Mode and Manual Exposure Mode. Also, you
cannot select [AUTO] in Manual Exposure Mode.
•
To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE
REDUCTION] in [FILM MODE] towards [
_
] or setting the items except [NOISE REDUCTION]
towards [
`
] to take pictures. (P82)
•
When [DIRECT AF AREA] (P125) is set to [ON], the operations on the cursor buttons translate
to movements of the AF area. Set using the Quick Menu (P30).
ISO sensitivity
100
6400
Recording location
(recommended)
When it is light (outdoors)
When it is dark
Shutter speed
Slow
Fast
Noise
Less
Increased
ISO sensitivity
Settings
AUTO
¢
The ISO sensitivity is automatically adjusted according to the
brightness.
¢
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
100/200/400/800/1600/3200/
6400
The ISO sensitivity is fixed to various settings.
(When the [ISO INCREMENTS] in [REC] Mode menu
(P119) is set to [1/3 EV], items of ISO sensitivity that can
be set will increase.)
DMC-G10KPP-VQT2S62_eng.book 80 ページ ２０１０年４月２３日 金曜日 午後８時０分
Summary of Contents for DMCG10K - DIGITAL CAMERA/LENS KIT
Page 199: ...199 VQT2S62 Others Others ...