VQT2S62
160
Others
Using the Remote Shutter (optional)
If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake)
when using a tripod and you can keep the shutter pressed fully when taking pictures with
[B] (Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the
camera.
Firmly connect the remote shutter to
the [REMOTE] socket on the camera as
far as it will go.
Take a picture.
1
Press the button lightly to press halfway.
2
Press the button fully to take the picture.
(Press it as far as it will go.)
∫
About [LOCK] on the remote shutter
•
You can keep the shutter button pressed fully. This is
effective when taking pictures with Burst Mode (P64) or
in [B] (Bulb) (P86).
•
While pressing the shutter button fully, slide it to the
[LOCK] side.
•
Slide it to the other side to cancel [LOCK].
Note
•
Do not use any other remote shutters except DMW-RSL1 (optional).
•
You cannot operate the camera with the remote shutter in the following cases.
–
When the Sleep Mode is canceled
REMOTE
DMC-G10KPP-VQT2S62_eng.book 160 ページ ２０１０年４月２３日 金曜日 午後８時０分
Summary of Contents for DMCG10K - DIGITAL CAMERA/LENS KIT
Page 199: ...199 VQT2S62 Others Others ...