61
VQT2S62
Advanced (Recording pictures)
•
When you use certain lenses, light from the flash may be blocked or fail to cover the lens
field of view, causing dark areas to appear in the resulting pictures.
•
When taking a picture with the flash, we recommend removing the lens hood. In some
cases it may not allow the scene to be illuminated properly.
•
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•
The Red-Eye Reduction effect differs between people. Also, if the subject was far away from
the camera or was not looking at the first flash, the effect may not be evident.
•
When you attach an external flash, it takes priority over the built-in flash. Refer to P158 for the
external flash.
Applicable modes:
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
Select [FLASH ADJUST.] in the [REC] Mode menu. (P28)
Press
2
/
1
to set the flash output and then press
[MENU/SET].
•
You can adjust from [
j
2 EV] to [
i
2 EV] in steps of [1/3 EV].
•
Select [0 EV] to return to the original flash output.
•
You can also use the rear dial to set.
Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
Note
•
[
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
•
The flash output setting is memorized even if the camera is turned off.
Adjust the flash output
DMC-G10KPP-VQT2S62_eng.book 61 ページ ２０１０年４月２３日 金曜日 午後８時０分
Summary of Contents for DMCG10K - DIGITAL CAMERA/LENS KIT
Page 199: ...199 VQT2S62 Others Others ...