VQT2S62
128
Advanced (Recording pictures)
•
It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Program Shift, aperture setting, or
shutter speed setting when set to [ON].
A
Dial operation guide
•
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
•
Turn the camera off and on after the pixels are corrected.
•
Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P166)
•
When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R; optional), set it to [ON].
[
¦
BUTTON SWITCH]
It is possible to set how the [
¦
] button to toggle to Intelligent
Auto Mode will operate.
[SINGLE PRESS]
:
It will switch to Intelligent Auto Mode by pressing [
¦
].
[PRESS AND HOLD]
:
It will switch to Intelligent Auto Mode by pressing [
¦
] for a while.
[DIAL GUIDE]
Sets if the operation switch guide when the mode dial is switched
to , ,
and
is
to
be
displayed
or
not.
[OFF]/[ON]
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
[SENSOR CLEANING]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
[SHOOT W/O LENS]
It is possible to setup so the shutter will not operate when there is
no lens on the unit.
[OFF]:
You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
[ON]:
Shutter will operate regardless of the lens on the unit.
A
DMC-G10KPP-VQT2S62_eng.book 128 ページ ２０１０年４月２３日 金曜日 午後８時０分
Summary of Contents for DMCG10K - DIGITAL CAMERA/LENS KIT
Page 199: ...199 VQT2S62 Others Others ...