Panasonic DMC-G85 Operating Instructions For Advanced Features Download

Page: 193 / 338

193

9. Using Menu Functions

Applicable modes:

You can adjust the brightness of bright and dark portions on an image while checking the
brightness on the screen.

Rotate the front/rear dial to adjust the brightness of
bright/dark portions.

Bright portion

Dark portion

• The rear dial is for adjusting dark areas, and the front

dial is for adjusting bright areas.

• To register a preferred setting, press

, and select the

destination where the custom setting will be registered to
([Custom1] (

)/[Custom2] (

)/[Custom3] (

)).

• Adjustments can also be made by dragging the graph.

Press [MENU/SET].

• The screen display can be switched by pressing [DISP.] on the brightness adjustment screen.

• Turning off this unit will return the setting adjusted with

back to the default setting.

[Highlight Shadow]

[Rec]

[Highlight Shadow]

(Standard)

A state with no adjustments is set.

(Raise the contrast)

Bright areas are brightened, and dark areas are darkened.

(Lower the contrast)

Bright areas are darkened, and dark areas are brightened.

(Brighten dark areas)

Dark areas are brightened.

(Custom)

Registered custom settings can be applied.

ヒ

ヤ

ビ

ヤ

ピ

ヤ

ヒ

ヤ

ビ

ヤ

ピ

ヤ

Summary of Contents for DMC-G85



















































































































































































































































































































































Search results

Summary of Contents for DMC-G85

Reviews:

Related manuals for DMC-G85

Brands by name

Popular brands

Panasonic DMC-G85, Operating Instructions For Advanced Features

Search results

Summary of Contents for DMC-G85

Reviews:

Related manuals for DMC-G85

Brands by name

Popular brands