5. 4K Photo and Drive Settings
130
1
Set the drive mode dial to [
].
2
Decide on the composition, and press the shutter
button halfway.
• Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
• If no areas on the screen can be brought into focus, the
focus display (
A
) will flash. Recording is not possible in
this case.
3
Press the shutter button fully to start recording.
• The focus point changes automatically while recording.
When the icon (
B
) disappears, recording automatically
ends.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed.
Recording with the Post Focus function
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
• Do not operate the zoom.
About camera temperature
• If the surrounding temperature is high, recording is performed continuously with the Post
Focus function, or the temperature of the camera rises, [
] may be displayed and
recording may stop halfway through to protect the camera. Wait until the camera cools
down.
5
m
04
s
4K
4:3
残
5
m
04
s
A
B
