Panasonic DMC-FX8-K - Lumix Digital Camera Operating Instructions Manual Download Page 16

Page: 16 / 116

Preparation

VQT0R26

Inserting/Removing the Card

• Check that the camera is turned off and

that the lens is retracted.

Slide the release lever to the
direction of arrow, and open the
card/battery door.

• The card and the data may be

damaged if it is inserted or removed
while the camera is turned on.

• We recommend using Panasonic’s

SD Memory Card. (Use only genuine
SD cards with an SD Logo.)

Insert:
Insert the card fully with the label
side facing the front of the
camera until it clicks.

Remove:
Push the card until it clicks, then
pull the card out upright.

• Check the direction of the card.
• Do not touch the connection terminals

on the back side of the card.

• The card may be damaged if it is not

fully inserted.

Close the card/battery door.

Slide the release lever to the
direction of arrow.

• If the card/battery door cannot be

completely closed, remove the card and
insert it again.

OPEN LOCK

Summary of Contents for DMC-FX8-K - Lumix Digital Camera





















































































































Search results

Summary of Contents for DMC-FX8-K - Lumix Digital Camera

Reviews:

Related manuals for DMC-FX8-K - Lumix Digital Camera

Brands by name

Popular brands

Panasonic DMC-FX8-K - Lumix Digital Camera, Operating Instructions Manual

Search results

Summary of Contents for DMC-FX8-K - Lumix Digital Camera

Reviews:

Related manuals for DMC-FX8-K - Lumix Digital Camera

Brands by name

Popular brands