Panasonic DMC-FX8-K - Lumix Digital Camera Operating Instructions Manual Download Page 13

Page: 13 / 116

Preparation

VQT0R26

Charging the Battery with the Charger

When the camera is shipped, the battery is
not charged. Charge the battery before
use.

Attach the battery with attention
to the direction of the battery.

Connect the charger to the
electrical outlet.

• When the [CHARGE] indicator

lights

in green, charging starts.

• When the [CHARGE] indicator

turns

off (in about 130 minutes), charging is
completed.

Detach the battery after charging
is completed.

• After charging is completed, be sure to

disconnect the charger from the electrical
outlet.

• The battery becomes warm after use/

charge or during charge. The camera also
becomes warm during use. However, it is
not a malfunction.

• The battery is exhausted when it is left for

a long period of time after being charged.
Recharge the battery when it is
exhausted.

• Use the dedicated charger and battery.
• Charge the battery with the charger

indoors.

• Do not disassemble or modify the

charger.

Summary of Contents for DMC-FX8-K - Lumix Digital Camera





















































































































Search results

Summary of Contents for DMC-FX8-K - Lumix Digital Camera

Reviews:

Related manuals for DMC-FX8-K - Lumix Digital Camera

Brands by name

Popular brands

Panasonic DMC-FX8-K - Lumix Digital Camera, Operating Instructions Manual

Search results

Summary of Contents for DMC-FX8-K - Lumix Digital Camera

Reviews:

Related manuals for DMC-FX8-K - Lumix Digital Camera

Brands by name

Popular brands