32
4/4 NEXT
To Check the Recording
You can play back the last few seconds of the
recorded scene in the Recording Pause Mode.
• Set to Tape Recording Mode.
1
Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2
Move the Joystick Control [
▼
] until the
page with [ ] indication is displayed.
[One-Touch Navigation icon]
3
Move the Joystick Control [
◄
] to select
[ ].
• The [RECORDING CHECK STARTED] and
the [ ] indication is displayed. After checking,
the Camcorder resumes the Recording Pause
Mode.
Finding the End of Recording
( Blank Search Function)
• Approximately 1 second before the last
recorded scene, the Camcorder switches to the
Recording Pause Mode or the Still Playback
Mode.
• If there is no blank left on the Cassette, the
Camcorder stops at the end of the tape.
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6
1 0 0
To Cancel the Blank Search Function
Before Completion
Move the Joystick Control [
▼
] to select [ ].
4/4 NEXT
[One-Touch Navigation icon]
3
Move the Joystick Control [
►
] to select
[ ].
• A confirmation message appears.
4
Move the Joystick Control [
▲
] or [
▼
]
to select [YES] and press the Joystick
Control.
YES
NO
SETUP ENTER EXIT
PERFORM BLANK SEARCH?
• The [ ] indication and the One-Touch
Navigation icon appears during the Blank
Search.
The Blank Search Function aids you in locating the
end of the recording on the Cassette quickly (unused
part of the tape).
• Set to Tape Recording/Playback Mode.
1
Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2
Move the Joystick Control [
▼
] until the
page with [ ] indication is displayed.
Concerning the remaining tape time
indication on the screen
• The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
• During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
• In some cases, the remaining tape time
indication may display remaining tape time
that is 2 to 3 minutes shorter than the actual
remaining tape time.
