77
Troubleshooting guide (continued)
Remote control
Recording and timer recording
The remote control doesn’t work.
≥
The unit is on standby to make a timer recording (“
” on the unit’s display is on). (page 32)
≥
[DVD, TV]
(19)
is not switched to “DVD”.
Switch to “DVD” when operating this unit. (page 8)
≥
The remote control code is wrong.
Change to the correct code. (page 65)
≥
The batteries are depleted. Replace them with new ones. (page 8)
≥
Point the remote control at the remote control sensor on the main unit. (page 8)
≥
Remove obstacles from between the remote control and main unit.
≥
The Child Lock function is activated. (page 56)
Cannot operate the television.
≥
The remote control code is wrong.
Change to the correct code. Some televisions cannot be operated even if you change the code.
(page 9)
≥
[DVD, TV]
(19)
is not switched to “TV”.
Switch to “TV” when operating the television. (page 9)
Cannot record.
≥
You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the unit
can record onto. (page 10)
≥
The disc is unformatted.
Format the disc so this unit can record on it. (page 38)
≥
The write protect tab on the cartridge is set to “PROTECT”.
Use a ballpoint pen or similar to release the write protection. (page 74)
≥
Recording is not possible unless you set “Disc Protection” in “DISC INFORMATION” to “Off”.
(page 37)
≥
The disc is full or nearly full.
Delete unneeded programmes or use another disc. (page 40)
≥
The material you are trying to record is copy-guarded.
≥
Tried to record to a DVD-R that has already been finalized.
VIDEO Plus+ programming does
not work properly.
≥
The clock is wrong.
Go to Settings in the SETUP menus and correct the clock with “Clock”. (page 66)
If “– –” appears under “Name”
after entering a VIDEO Plus+
number
≥
Use [
3
,
4
]
(10)
repeatedly to select the programme position on which the TV programme to be
recorded will be broadcast.
Timer recording does not work
properly.
≥
The timer programme is incorrect.
Make corrections to the programme and check them when you are finished. (pages 32 and 34)
≥
The unit is not on standby for timer recording. (“
” on the unit’s display is not on.)
≥
Different timer programme times overlap. (page 32)
≥
The clock is wrong.
Go to Settings in the SETUP menus and correct the clock with “Clock”. (page 66)
≥
Timer recording will not be activated during formatting, editing of still pictures and other such
operations which are not by their nature suitable for interruption when they are being carried out.
The unit switches to standby
while making a timer recording.
≥
The unit switches to standby while making a timer recording if the disc runs out of space.
Use a disc that has enough space to record the programme.
The timer programme remains
even after recording finishes.
≥
The programme remains if you select weekly or daily setting. (pages 32 and 33)
The available recording time
doesn’t increase even after
erasing all recordings on the disc.
≥
The available recording time does not increase if you erase data written to the disc with the
DVD-RAM drive of a computer.
Format the disc if necessary. (page 38)
≥
If the disc is dirty, wipe with the DVD-RAM/PD lens cleaner (optional) before formatting.
≥
Available recording space on the DVD-RAM does not increase even after erasing previously
recorded programming.
A part or whole of a recorded
programme has been lost.
≥
If there is a power failure or the plug is disconnected from the household AC outlet while
recording or editing, the programme may be lost or the disc may become unusable.
)
We cannot offer any guarantee regarding lost programmes or discs. You will have to format
the disc or use a new disc.
B.book 77 ページ ２００３年５月２日 金曜日 午前１０時８分
Summary of Contents for Diga DMR-E60
Page 81: ...81 ...
