Panasonic Diga DMR-E60, Operating Instructions Manual

Page: 58 / 82

58
Connecting external equipments (continued)
Connecting a Decoder
Decoder here refers to the device used to decode scrambled
broadcasts (Pay TV).
(1) Decoder (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
Connect a 21-pin Scart cable (not supplied) to the AV2 21-
pin Scart socket on the unit and to the 21-pin Scart socket
on the decoder.
Connect the decoder’s mains lead to an AC mains socket.
Set “AV2 Connection” to “DECODER”. (page 63)
≥
If you connect an other equipment with RGB output capability to
the AV2 socket on this unit, the output signal of the equipment
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”. (page 63)
Note
[RGB] means separate Red/Green/Blue colour signals. If you
connect a TV equipped with RGB input capability to the AV1
socket on this unit, and a decoder equipped with RGB output
capability to the AV2 socket, the TV can receive RGB signal input
from the decoder via the unit.
Connecting a satellite receiver or digital
receiver
(1) Satellite receiver (not supplied)
(2) 21-pin Scart socket
(3) 21-pin Scart cable (not supplied)
Connect a 21-pin Scart cable (not supplied) to the AV2 21-
pin Scart socket on the unit and to the 21-pin Scart socket
on the satellite receiver.
Connect the satellite receiver’s mains lead to an AC mains
socket.
Set “AV2 Connection” to, “Ext Link 1” or “Ext Link 2”.
(page 63)
≥
If you connect an other equipment with RGB output capability to
the AV2 socket on this unit, the output signal of the equipment
must be set to RGB when you have set “AV2 Input” to “RGB (PAL
only)”. (page 63)
RF IN
RF OUT
OPTICAL
AV1 (TV)
AV2 (DECODER/EXT)
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L VIDEO S-VIDEO
R - AUDIO - L VIDEO S-VIDEO
A
V4 IN
OUT
(1)
(2)
(3)
RF IN
RF OUT
OPTICAL
AV1 (TV)
AV2 (DECODER/EXT) DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L VIDEO S-VIDEO
R - AUDIO - L VIDEO S-VIDEO
A
V4 IN
OUT
(1)
(2)
(3)
B.book 58 ページ ２００３年５月２日 金曜日 午前１０時８分